[PATCH v4 4/4] dt-bindings: timer: Add CLINT bindings

Palmer Dabbelt palmer at dabbelt.com
Sun Jul 26 14:37:00 EDT 2020


On Tue, 21 Jul 2020 20:55:31 PDT (-0700), anup at brainfault.org wrote:
> On Tue, Jul 21, 2020 at 5:48 PM Sean Anderson <seanga2 at gmail.com> wrote:
>>
>> On 7/20/20 9:15 PM, Atish Patra wrote:
>> > On Fri, Jul 17, 2020 at 12:52 AM Anup Patel <anup.patel at wdc.com> wrote:
>> >>
>> >> We add DT bindings documentation for CLINT device.
>> >>
>> >> Signed-off-by: Anup Patel <anup.patel at wdc.com>
>> >> Reviewed-by: Palmer Dabbelt <palmerdabbelt at google.com>
>> >> Tested-by: Emil Renner Berhing <kernel at esmil.dk>
>> >> ---
>> >>  .../bindings/timer/sifive,clint.yaml          | 58 +++++++++++++++++++
>> >>  1 file changed, 58 insertions(+)
>> >>  create mode 100644 Documentation/devicetree/bindings/timer/sifive,clint.yaml
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
>> >> new file mode 100644
>> >> index 000000000000..8ad115611860
>> >> --- /dev/null
>> >> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
>> >> @@ -0,0 +1,58 @@
>> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> >> +%YAML 1.2
>> >> +---
>> >> +$id: http://devicetree.org/schemas/timer/sifive,clint.yaml#
>> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> >> +
>> >> +title: SiFive Core Local Interruptor
>> >> +
>> >> +maintainers:
>> >> +  - Palmer Dabbelt <palmer at dabbelt.com>
>> >> +  - Anup Patel <anup.patel at wdc.com>
>> >> +
>> >> +description:
>> >> +  SiFive (and other RISC-V) SOCs include an implementation of the SiFive
>> >> +  Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor
>> >> +  interrupts. It directly connects to the timer and inter-processor interrupt
>> >> +  lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local
>> >> +  interrupt controller is the parent interrupt controller for CLINT device.
>> >> +  The clock frequency of CLINT is specified via "timebase-frequency" DT
>> >> +  property of "/cpus" DT node. The "timebase-frequency" DT property is
>> >> +  described in Documentation/devicetree/bindings/riscv/cpus.yaml
>> >> +
>> >> +properties:
>> >> +  compatible:
>> >> +    items:
>> >> +      - const: sifive,clint0
>> >> +      - const: sifive,fu540-c000-clint
>> >> +
>> >> +    description:
>> >> +      Should be "sifive,<chip>-clint" and "sifive,clint<version>".
>> >> +      Supported compatible strings are -
>> >> +      "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
>> >> +      onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive
>> >> +      CLINT v0 IP block with no chip integration tweaks.
>> >> +      Please refer to sifive-blocks-ip-versioning.txt for details
>> >> +
>> >
>> > As the DT binding suggests that the clint device should be named as "sifive,**",
>> > I think we should change the DT property in kendryte dts as well.
>>
>> The kendryte device is based on Rocket Chip, not any SiFive IP/device.
>> If anything, the general binding should be "chipsalliance,clint" and the
>> specific bindings should be "sifive,clint" and "kendryte,clint" (or
>> "canaan,clint").
>
> AFAIK, Palmer clearly mentioned in previous discussion that CLINT
> spec is still owned by SiFive. No matter who implements CLINT device
> in their SOC, we will need one compatible string to represent the
> spec version (i.e. "sifive,clint0") and another compatible representing
> specific implementation (for kendryte this can be "kendryte,k210-clint").

I think "sifive,clint*" is the way to go here.  The Free Chips Foundation owns
Rocket Chip, which contains an implementation of SiFive's CLINT specification,
but as far as I can tell Free Chips itself does not produce a specification for
the CLINT.  The only CLINT specifications I can find are for SiFive's chips and
are copyright SiFive, and we generally prefer sticking to specifications rather
than implementations for these sorts of things.

To be honest, I'm not even sure the Free Chips CLINT is an implementation of
the SiFive specification: we don't have the source code for those chips, and
while I'm fairly sure the Chisel source code for the CLINT itself on SiFive's
chips is very close to what was in Rocket Chip at the time those chips were
built (though we don't have the source, so we don't know for user), device
specifications depend on the broader SOC context they are embedded inside.  For
example: SiFive's CLINT allows us to use simple MMIO reads of mtime to meet the
RISC-V rdtime requirements, but other bus configurations may not meet those
requirement<F6><F5>s.

If Free Chips publishes a specification for a CLINT and it's compatible with
this version of SiFive's CLINT then I don't see any reason why we couldn't add
that as a compatible string, but as it currently stands there is no Free Chips
CLINT specification.  IMO it would be irresponsible for us to define one on
their behalf.

I don't know anything about Kendryte's specifications, as I haven't read them
myself.  Assuming they define the CLINT's behavior in their SOC manual, then
adding something along the lines of "canaan,kendryte-k210-clint" seems
reasonable to me -- don't really care that much about the specific name, but as
we don't define the Kendryte SOCs then calling it anything more general than
this specific SOC's CLINT seems unreasonable.  AFAIK the Kendryte people don't
get involved with Linux development directly, so that's probably as much as we
can define.



More information about the linux-riscv mailing list