[PATCH v4 2/4] clocksource/drivers: Add CLINT timer driver

[Anup Patel]

On Tue, Jul 21, 2020 at 5:45 PM Daniel Lezcano
<daniel.lezcano at linaro.org> wrote:
>
> On 21/07/2020 13:49, Anup Patel wrote:
> > On Tue, Jul 21, 2020 at 4:32 PM Daniel Lezcano
> > <daniel.lezcano at linaro.org> wrote:
> >>
> >> On 17/07/2020 09:50, Anup Patel wrote:
> >>> We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e.
> >>> RISC-V NoMMU kernel).
> >>>
> >>> The CLINT MMIO device provides three things:
> >>> 1. 64bit free running counter register
> >>> 2. 64bit per-CPU time compare registers
> >>> 3. 32bit per-CPU inter-processor interrupt registers
> >>>
> >>> Unlike other timer devices, CLINT provides IPI registers along with
> >>> timer registers. To use CLINT IPI registers, the CLINT timer driver
> >>> provides IPI related callbacks to arch/riscv.
> >>>
> >>> Signed-off-by: Anup Patel <anup.patel at wdc.com>
> >>> Tested-by: Emil Renner Berhing <kernel at esmil.dk>
> >>> ---
> >>>  drivers/clocksource/Kconfig       |   9 ++
> >>>  drivers/clocksource/Makefile      |   1 +
> >>>  drivers/clocksource/timer-clint.c | 231 ++++++++++++++++++++++++++++++
> >>>  include/linux/cpuhotplug.h        |   1 +
> >>>  4 files changed, 242 insertions(+)
> >>>  create mode 100644 drivers/clocksource/timer-clint.c
> >>>
> >>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> >>> index 91418381fcd4..e1ce0d510a03 100644
> >>> --- a/drivers/clocksource/Kconfig
> >>> +++ b/drivers/clocksource/Kconfig
> >>> @@ -658,6 +658,15 @@ config RISCV_TIMER
> >>>         is accessed via both the SBI and the rdcycle instruction.  This is
> >>>         required for all RISC-V systems.
> >>>
> >>> +config CLINT_TIMER
> >>> +     bool "Timer for the RISC-V platform"
> >>> +     depends on GENERIC_SCHED_CLOCK && RISCV_M_MODE
> >>> +     select TIMER_PROBE
> >>> +     select TIMER_OF
> >>> +     help
> >>> +       This option enables the CLINT timer for RISC-V systems. The CLINT
> >>> +       driver is usually used for NoMMU RISC-V systems.
> >>
> >> V3 has a comment about fixing the Kconfig option.
> >
> > I have removed "default y" from the Kconfig option as-per your suggestions.
> >
> > I looked at other Timer Kconfig options. Most of them have menuconfig name.
> > Also, we can certainly have different timer MMIO timer drivers in future. Do
> > you still insist on making this kconfig option totally silent ??
>
> Yes, and there is an effort to change the entries to be silent as much
> as possible.
>
> Just add:
>
>         bool "Timer for the RISC-V platform" if COMPILE_TEST

Okay, I will update.

>
> and remove the RISCV_M_MODE dependency.

CLINT driver depends on RISC-V specific symbols from asm/smp.h
so we should at least have "depends on RISCV" so that compile
test does not fail.

Agree ??

>
> Or alternatively:
>
> replace the RISCV_M_MODE dependency with COMPILE_TEST
>
> The goal is to be able to compile the driver on different platforms for
> compilation test covering.

Please see the above comment.

>
> Then when more mmio drivers will added we will figure out.
>
> >> [ ... ]
> >>
> >>> +{
> >>> +     bool *registered = per_cpu_ptr(&clint_clock_event_registered, cpu);
> >>> +     struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu);
> >>> +
> >>> +     if (!(*registered)) {
> >>> +             ce->cpumask = cpumask_of(cpu);
> >>> +             clockevents_config_and_register(ce, clint_timer_freq, 200,
> >>> +                                              ULONG_MAX);
> >>> +             *registered = true;
> >>> +     }
> >>
> >>
> >> I was unsure about the clockevents_config_and_register() multiple calls
> >> when doing the comment. It seems like it is fine to call it several
> >> times and that is done in several places like riscv or arch_arm_timer.
> >>
> >> It is probably safe to drop the 'registered' code here, sorry for the
> >> confusion.
> >
> > Okay, will revert these changes.
> >
> >>
> >>> +     enable_percpu_irq(clint_timer_irq,
> >>> +                       irq_get_trigger_type(clint_timer_irq));
> >>> +     return 0;
> >>> +}
> >>> +
> >>
> >> [ ... ]
> >>
> >>
> >> --
> >> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
> >>
> >> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> >> <http://twitter.com/#!/linaroorg> Twitter |
> >> <http://www.linaro.org/linaro-blog/> Blog
> >
> > Regards,
> > Anup
> >
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Regards,
Anup