[RFC PATCH v2 00/11] Add UEFI support for RISC-V
Atish Patra
atish.patra at wdc.com
Mon Jul 6 13:25:58 EDT 2020
This series adds UEFI support for RISC-V.
Linux kernel: 5.8-rc4
U-Boot: master
OpenSBI: master
Patch 1-6 are preparatory patches that fixes some of the geric efi and riscv issues.
Patch 7-9 adds the efi stub support for RISC-V which was reviewed few months back.
https://www.spinics.net/lists/linux-efi/msg19144.html
Patch 10 just renames arm-init code so that it can be used across different
architectures. Patch 11 adds the runtime services for RISC-V.
The patches can also be found in following git repo.
https://github.com/atishp04/linux/tree/uefi_riscv_5.9_v2
The patches have been verified on Qemu using bootefi command in U-Boot for both
RV32 and RV64.
For RV32, maximum allocated memory should be 1G as RISC-V kernel can not map
beyond 1G of physical memory for RV32.
EDK2 can boot quite far into Linux with current series. Currently, we are seeing
some traps from drivers (spi/network). At first glance, they don't seem to be
caused by efi. I thought it is better to get some early feedback on the series
while EDK2 issue is being debugged.
That's why uefi runtime services are not actually well tested in RISC-V.
Any suggestions to test the efi run time services are appreciated.
Changes from v1->v2:
1. Removed patch 1 as it is already taken into efi-tree.
2. Fixed compilation issues with patch 9.
3. Moved few function prototype declaration to header file to keep kbuild happy.
Changes from previous version:
1. Added full ioremap support.
2. Added efi runtime services support.
3. Fixes mm issues
Anup Patel (1):
RISC-V: Move DT mapping outof fixmap
Atish Patra (10):
efi/libstub: Move the function prototypes to header file
RISC-V: Setup exception vector early
RISC-V: Add early ioremap support
RISC-V: Set maximum number of mapped pages correctly
riscv: Parse all memory blocks to remove unusable memory
include: pe.h: Add RISC-V related PE definition
RISC-V: Add PE/COFF header for EFI stub
RISC-V: Add EFI stub support.
efi: Rename arm-init to efi-init common for all arch
RISC-V: Add EFI runtime services
arch/riscv/Kconfig | 25 ++++
arch/riscv/Makefile | 1 +
arch/riscv/configs/defconfig | 1 +
arch/riscv/include/asm/Kbuild | 1 +
arch/riscv/include/asm/efi.h | 56 +++++++
arch/riscv/include/asm/fixmap.h | 16 +-
arch/riscv/include/asm/io.h | 1 +
arch/riscv/include/asm/mmu.h | 2 +
arch/riscv/include/asm/pgalloc.h | 12 ++
arch/riscv/include/asm/pgtable.h | 4 +
arch/riscv/include/asm/sections.h | 13 ++
arch/riscv/kernel/Makefile | 5 +
arch/riscv/kernel/efi-header.S | 104 +++++++++++++
arch/riscv/kernel/efi.c | 106 +++++++++++++
arch/riscv/kernel/head.S | 27 +++-
arch/riscv/kernel/head.h | 2 -
arch/riscv/kernel/image-vars.h | 51 +++++++
arch/riscv/kernel/setup.c | 16 +-
arch/riscv/kernel/smpboot.c | 1 -
arch/riscv/kernel/traps.c | 8 +-
arch/riscv/kernel/vmlinux.lds.S | 22 ++-
arch/riscv/mm/init.c | 104 ++++++++-----
drivers/firmware/efi/Kconfig | 3 +-
drivers/firmware/efi/Makefile | 4 +-
.../firmware/efi/{arm-init.c => efi-init.c} | 0
drivers/firmware/efi/libstub/Makefile | 10 ++
drivers/firmware/efi/libstub/efi-stub.c | 28 ++--
drivers/firmware/efi/libstub/efistub.h | 16 ++
drivers/firmware/efi/libstub/riscv-stub.c | 110 ++++++++++++++
drivers/firmware/efi/riscv-runtime.c | 141 ++++++++++++++++++
include/linux/pe.h | 3 +
31 files changed, 811 insertions(+), 82 deletions(-)
create mode 100644 arch/riscv/include/asm/efi.h
create mode 100644 arch/riscv/include/asm/sections.h
create mode 100644 arch/riscv/kernel/efi-header.S
create mode 100644 arch/riscv/kernel/efi.c
create mode 100644 arch/riscv/kernel/image-vars.h
rename drivers/firmware/efi/{arm-init.c => efi-init.c} (100%)
create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
create mode 100644 drivers/firmware/efi/riscv-runtime.c
--
2.24.0
More information about the linux-riscv
mailing list