[PATCH v10 06/23] riscv: Fix Canaan Kendryte K210 device tree

[Anup Patel]

On Sun, Dec 13, 2020 at 7:21 PM Damien Le Moal <damien.lemoal at wdc.com> wrote:
>
> Remove the clocks property from the cpu and clint nodes as these are
> ignored. Also remove the clock-frequency property from the cpu nodes as
> riscv relies on the timebase-frequency property.
>
> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
> ---
>  arch/riscv/boot/dts/canaan/k210.dtsi | 5 -----
>  1 file changed, 5 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
> index d2d0ff645632..354b263195a3 100644
> --- a/arch/riscv/boot/dts/canaan/k210.dtsi
> +++ b/arch/riscv/boot/dts/canaan/k210.dtsi
> @@ -38,8 +38,6 @@ cpu0: cpu at 0 {
>                         i-cache-block-size = <64>;
>                         d-cache-size = <0x8000>;
>                         d-cache-block-size = <64>;
> -                       clocks = <&sysctl K210_CLK_CPU>;
> -                       clock-frequency = <390000000>;
>                         cpu0_intc: interrupt-controller {
>                                 #interrupt-cells = <1>;
>                                 interrupt-controller;
> @@ -56,8 +54,6 @@ cpu1: cpu at 1 {
>                         i-cache-block-size = <64>;
>                         d-cache-size = <0x8000>;
>                         d-cache-block-size = <64>;
> -                       clocks = <&sysctl K210_CLK_CPU>;
> -                       clock-frequency = <390000000>;
>                         cpu1_intc: interrupt-controller {
>                                 #interrupt-cells = <1>;
>                                 interrupt-controller;
> @@ -101,7 +97,6 @@ clint0: clint at 2000000 {
>                         reg = <0x2000000 0xC000>;
>                         interrupts-extended =  <&cpu0_intc 3 &cpu0_intc 7
>                                                 &cpu1_intc 3 &cpu1_intc 7>;
> -                       clocks = <&sysctl K210_CLK_ACLK>;
>                 };
>
>                 plic0: interrupt-controller at c000000 {
> --
> 2.29.2
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Looks good to me.

Reviewed-by: Anup Patel <anup at brainfault.org>

Regards,
Anup