[PATCH v3 0/8] net: macb: add support for sama7g5

[Nicolas Ferre]

On 09/12/2020 at 14:03, Claudiu Beznea wrote:
> Hi,
> 
> This series adds support for SAMA7G5 Ethernet interfaces: one 10/100Mbps
> and one 1Gbps interfaces.
> 
> Along with it I also included a fix to disable clocks for SiFive FU540-C000
> on failure path of fu540_c000_clk_init().
> 
> Thank you,
> Claudiu Beznea
> 
> Changed in v3:
> - use clk_bulk_disable_unprepare in patch 3/8
> - corrected clang compilation warning in patch 3/8
> - revert changes in macb_clk_init() in patch 3/8
> 
> Changes in v2:
> - introduced patch "net: macb: add function to disable all macb clocks" and
>    update patch "net: macb: unprepare clocks in case of failure" accordingly
> - collected tags
> 
> Claudiu Beznea (8):
>    net: macb: add userio bits as platform configuration
>    net: macb: add capability to not set the clock rate
>    net: macb: add function to disable all macb clocks
>    net: macb: unprepare clocks in case of failure
>    dt-bindings: add documentation for sama7g5 ethernet interface
>    dt-bindings: add documentation for sama7g5 gigabit ethernet interface
>    net: macb: add support for sama7g5 gem interface
>    net: macb: add support for sama7g5 emac interface

For the whole series:
Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>

Thanks Claudiu, best regards,
   Nicolas

>   Documentation/devicetree/bindings/net/macb.txt |   2 +
>   drivers/net/ethernet/cadence/macb.h            |  11 ++
>   drivers/net/ethernet/cadence/macb_main.c       | 134 ++++++++++++++++++-------
>   3 files changed, 111 insertions(+), 36 deletions(-)
> 


-- 
Nicolas Ferre