[PATCH v8 06/22] riscv: cleanup Canaan Kendryte K210 sysctl driver
Damien Le Moal
damien.lemoal at wdc.com
Thu Dec 10 09:02:57 EST 2020
Introduce the header file include/soc/canaan/k210-sysctl.h to have a
common definition of the Canaan Kendryte K210 SoC system controller
registers. Simplify the k210 system controller driver code by removing
unused register bits definition. The MAINTAINERS file is updated,
adding the entry "CANAAN/KENDRYTE K210 SOC SYSTEM CONTROLLER DRIVER"
with myself listed as maintainer for this driver.
This is a preparatory patch for introducing the K210 clock driver. No
functional changes are introduced.
Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
---
MAINTAINERS | 7 +++
drivers/soc/canaan/k210-sysctl.c | 93 +++++++++-----------------------
include/soc/canaan/k210-sysctl.h | 41 ++++++++++++++
3 files changed, 74 insertions(+), 67 deletions(-)
create mode 100644 include/soc/canaan/k210-sysctl.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f474153dbec..6d06a5fda7ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3831,6 +3831,13 @@ W: https://github.com/Cascoda/ca8210-linux.git
F: Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
F: drivers/net/ieee802154/ca8210.c
+CANAAN/KENDRYTE K210 SOC SYSTEM CONTROLLER DRIVER
+M: Damien Le Moal <damien.lemoal at wdc.com>
+L: linux-riscv at lists.infradead.org
+S: Maintained
+F: drivers/soc/canaan/
+F: include/soc/canaan/
+
CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
M: David Howells <dhowells at redhat.com>
L: linux-cachefs at redhat.com (moderated for non-subscribers)
diff --git a/drivers/soc/canaan/k210-sysctl.c b/drivers/soc/canaan/k210-sysctl.c
index 4608fbca20e1..60b474c33d45 100644
--- a/drivers/soc/canaan/k210-sysctl.c
+++ b/drivers/soc/canaan/k210-sysctl.c
@@ -12,74 +12,33 @@
#include <linux/bitfield.h>
#include <asm/soc.h>
+#include <soc/canaan/k210-sysctl.h>
+
#define K210_SYSCTL_CLK0_FREQ 26000000UL
/* Registers base address */
#define K210_SYSCTL_SYSCTL_BASE_ADDR 0x50440000ULL
-/* Registers */
-#define K210_SYSCTL_PLL0 0x08
-#define K210_SYSCTL_PLL1 0x0c
-/* clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */
-#define PLL_RESET (1 << 20)
-#define PLL_PWR (1 << 21)
-#define PLL_INTFB (1 << 22)
-#define PLL_BYPASS (1 << 23)
-#define PLL_TEST (1 << 24)
-#define PLL_OUT_EN (1 << 25)
-#define PLL_TEST_EN (1 << 26)
-#define K210_SYSCTL_PLL_LOCK 0x18
-#define PLL0_LOCK1 (1 << 0)
-#define PLL0_LOCK2 (1 << 1)
-#define PLL0_SLIP_CLEAR (1 << 2)
-#define PLL0_TEST_CLK_OUT (1 << 3)
-#define PLL1_LOCK1 (1 << 8)
-#define PLL1_LOCK2 (1 << 9)
-#define PLL1_SLIP_CLEAR (1 << 10)
-#define PLL1_TEST_CLK_OUT (1 << 11)
-#define PLL2_LOCK1 (1 << 16)
-#define PLL2_LOCK2 (1 << 16)
-#define PLL2_SLIP_CLEAR (1 << 18)
-#define PLL2_TEST_CLK_OUT (1 << 19)
-#define K210_SYSCTL_CLKSEL0 0x20
-#define CLKSEL_ACLK (1 << 0)
-#define K210_SYSCTL_CLKEN_CENT 0x28
-#define CLKEN_CPU (1 << 0)
-#define CLKEN_SRAM0 (1 << 1)
-#define CLKEN_SRAM1 (1 << 2)
-#define CLKEN_APB0 (1 << 3)
-#define CLKEN_APB1 (1 << 4)
-#define CLKEN_APB2 (1 << 5)
-#define K210_SYSCTL_CLKEN_PERI 0x2c
-#define CLKEN_ROM (1 << 0)
-#define CLKEN_DMA (1 << 1)
-#define CLKEN_AI (1 << 2)
-#define CLKEN_DVP (1 << 3)
-#define CLKEN_FFT (1 << 4)
-#define CLKEN_GPIO (1 << 5)
-#define CLKEN_SPI0 (1 << 6)
-#define CLKEN_SPI1 (1 << 7)
-#define CLKEN_SPI2 (1 << 8)
-#define CLKEN_SPI3 (1 << 9)
-#define CLKEN_I2S0 (1 << 10)
-#define CLKEN_I2S1 (1 << 11)
-#define CLKEN_I2S2 (1 << 12)
-#define CLKEN_I2C0 (1 << 13)
-#define CLKEN_I2C1 (1 << 14)
-#define CLKEN_I2C2 (1 << 15)
-#define CLKEN_UART1 (1 << 16)
-#define CLKEN_UART2 (1 << 17)
-#define CLKEN_UART3 (1 << 18)
-#define CLKEN_AES (1 << 19)
-#define CLKEN_FPIO (1 << 20)
-#define CLKEN_TIMER0 (1 << 21)
-#define CLKEN_TIMER1 (1 << 22)
-#define CLKEN_TIMER2 (1 << 23)
-#define CLKEN_WDT0 (1 << 24)
-#define CLKEN_WDT1 (1 << 25)
-#define CLKEN_SHA (1 << 26)
-#define CLKEN_OTP (1 << 27)
-#define CLKEN_RTC (1 << 29)
+/* Register bits */
+/* K210_SYSCTL_PLL1: clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */
+#define PLL_RESET (1 << 20)
+#define PLL_PWR (1 << 21)
+#define PLL_BYPASS (1 << 23)
+#define PLL_OUT_EN (1 << 25)
+/* K210_SYSCTL_PLL_LOCK */
+#define PLL1_LOCK1 (1 << 8)
+#define PLL1_LOCK2 (1 << 9)
+#define PLL1_SLIP_CLEAR (1 << 10)
+/* K210_SYSCTL_SEL0 */
+#define CLKSEL_ACLK (1 << 0)
+/* K210_SYSCTL_CLKEN_CENT */
+#define CLKEN_CPU (1 << 0)
+#define CLKEN_SRAM0 (1 << 1)
+#define CLKEN_SRAM1 (1 << 2)
+/* K210_SYSCTL_EN_PERI */
+#define CLKEN_ROM (1 << 0)
+#define CLKEN_TIMER0 (1 << 21)
+#define CLKEN_RTC (1 << 29)
struct k210_sysctl {
void __iomem *regs;
@@ -140,7 +99,7 @@ static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw,
* If the clock selector is not set, use the base frequency.
* Otherwise, use PLL0 frequency with a frequency divisor.
*/
- clksel0 = readl(s->regs + K210_SYSCTL_CLKSEL0);
+ clksel0 = readl(s->regs + K210_SYSCTL_SEL0);
if (!(clksel0 & CLKSEL_ACLK))
return K210_SYSCTL_CLK0_FREQ;
@@ -237,11 +196,11 @@ static void __init k210_soc_early_init(const void *fdt)
k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0);
k210_set_bits(CLKEN_CPU | CLKEN_SRAM0 | CLKEN_SRAM1,
- regs + K210_SYSCTL_CLKEN_CENT);
+ regs + K210_SYSCTL_EN_CENT);
k210_set_bits(CLKEN_ROM | CLKEN_TIMER0 | CLKEN_RTC,
- regs + K210_SYSCTL_CLKEN_PERI);
+ regs + K210_SYSCTL_EN_PERI);
- k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_CLKSEL0);
+ k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_SEL0);
iounmap(regs);
}
diff --git a/include/soc/canaan/k210-sysctl.h b/include/soc/canaan/k210-sysctl.h
new file mode 100644
index 000000000000..2e037db68f35
--- /dev/null
+++ b/include/soc/canaan/k210-sysctl.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef K210_SYSCTL_H
+#define K210_SYSCTL_H
+
+/*
+ * Kendryte K210 SoC system controller registers offsets.
+ * Taken from Kendryte SDK (kendryte-standalone-sdk).
+ */
+#define K210_SYSCTL_GIT_ID 0x00 /* Git short commit id */
+#define K210_SYSCTL_UART_BAUD 0x04 /* Default UARTHS baud rate */
+#define K210_SYSCTL_PLL0 0x08 /* PLL0 controller */
+#define K210_SYSCTL_PLL1 0x0C /* PLL1 controller */
+#define K210_SYSCTL_PLL2 0x10 /* PLL2 controller */
+#define K210_SYSCTL_PLL_LOCK 0x18 /* PLL lock tester */
+#define K210_SYSCTL_ROM_ERROR 0x1C /* AXI ROM detector */
+#define K210_SYSCTL_SEL0 0x20 /* Clock select controller 0 */
+#define K210_SYSCTL_SEL1 0x24 /* Clock select controller 1 */
+#define K210_SYSCTL_EN_CENT 0x28 /* Central clock enable */
+#define K210_SYSCTL_EN_PERI 0x2C /* Peripheral clock enable */
+#define K210_SYSCTL_SOFT_RESET 0x30 /* Soft reset ctrl */
+#define K210_SYSCTL_PERI_RESET 0x34 /* Peripheral reset controller */
+#define K210_SYSCTL_THR0 0x38 /* Clock threshold controller 0 */
+#define K210_SYSCTL_THR1 0x3C /* Clock threshold controller 1 */
+#define K210_SYSCTL_THR2 0x40 /* Clock threshold controller 2 */
+#define K210_SYSCTL_THR3 0x44 /* Clock threshold controller 3 */
+#define K210_SYSCTL_THR4 0x48 /* Clock threshold controller 4 */
+#define K210_SYSCTL_THR5 0x4C /* Clock threshold controller 5 */
+#define K210_SYSCTL_THR6 0x50 /* Clock threshold controller 6 */
+#define K210_SYSCTL_MISC 0x54 /* Miscellaneous controller */
+#define K210_SYSCTL_PERI 0x58 /* Peripheral controller */
+#define K210_SYSCTL_SPI_SLEEP 0x5C /* SPI sleep controller */
+#define K210_SYSCTL_RESET_STAT 0x60 /* Reset source status */
+#define K210_SYSCTL_DMA_SEL0 0x64 /* DMA handshake selector 0 */
+#define K210_SYSCTL_DMA_SEL1 0x68 /* DMA handshake selector 1 */
+#define K210_SYSCTL_POWER_SEL 0x6C /* IO Power Mode Select controller */
+
+#endif
--
2.29.2
More information about the linux-riscv
mailing list