[PATCH v7 2/5] clk: sifive: Use common name for prci configuration

[Zong Li]

Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
patch is prepared for fu740 support.

Signed-off-by: Zong Li <zong.li at sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt at google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt at google.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel at sifive.com>
---
 arch/riscv/Kconfig.socs     | 2 +-
 drivers/clk/sifive/Kconfig  | 6 +++---
 drivers/clk/sifive/Makefile | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 8a55f6156661..3284d5c291be 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -5,7 +5,7 @@ config SOC_SIFIVE
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select CLK_SIFIVE
-	select CLK_SIFIVE_FU540_PRCI
+	select CLK_SIFIVE_PRCI
 	select SIFIVE_PLIC
 	help
 	  This enables support for SiFive SoC platform hardware.
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index f3b4eb9cb0f5..ab48cf7e0105 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -8,12 +8,12 @@ menuconfig CLK_SIFIVE
 
 if CLK_SIFIVE
 
-config CLK_SIFIVE_FU540_PRCI
-	bool "PRCI driver for SiFive FU540 SoCs"
+config CLK_SIFIVE_PRCI
+	bool "PRCI driver for SiFive SoCs"
 	select CLK_ANALOGBITS_WRPLL_CLN28HPC
 	help
 	  Supports the Power Reset Clock interface (PRCI) IP block found in
-	  FU540 SoCs.  If this kernel is meant to run on a SiFive FU540 SoC,
+	  FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
 	  enable this driver.
 
 endif
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index 51b6ebc359e4..3074cdbc6009 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI)	+= sifive-prci.o fu540-prci.o
+obj-$(CONFIG_CLK_SIFIVE_PRCI)	+= sifive-prci.o fu540-prci.o
-- 
2.29.2