[PATCH v2 1/2] RISC-V: Update l2 cache DT documentation to add support for SiFive FU740

[Rob Herring]

On Mon, Nov 30, 2020 at 11:13:03AM +0530, Yash Shah wrote:
> The L2 cache controller in SiFive FU740 has 4 ECC interrupt sources as
> compared to 3 in FU540. Update the DT documentation accordingly with
> "compatible" and "interrupt" property changes.

'dt-bindings: riscv: ...' for the subject.

> 
> Signed-off-by: Yash Shah <yash.shah at sifive.com>
> ---
> Changes in v2:
> - Changes as per Rob Herring's request on v1
> ---
>  .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 35 ++++++++++++++++++++--
>  1 file changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> index efc0198..749265c 100644
> --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> @@ -27,6 +27,7 @@ select:
>        items:
>          - enum:
>              - sifive,fu540-c000-ccache
> +            - sifive,fu740-c000-ccache
>  
>    required:
>      - compatible
> @@ -34,7 +35,9 @@ select:
>  properties:
>    compatible:
>      items:
> -      - const: sifive,fu540-c000-ccache
> +      - enum:
> +          - sifive,fu540-c000-ccache
> +          - sifive,fu740-c000-ccache
>        - const: cache
>  
>    cache-block-size:
> @@ -53,9 +56,15 @@ properties:
>  
>    interrupts:
>      description: |
> -      Must contain entries for DirError, DataError and DataFail signals.
> +      Must contain 3 entries for FU540 (DirError, DataError and DataFail) or 4
> +      entries for other chips (DirError, DirFail, DataError, DataFail signals)

While below is wrong, don't give descriptions that just repeat what the 
schema says.

>      minItems: 3
> -    maxItems: 3
> +    maxItems: 4
> +    items:
> +      - description: DirError interrupt
> +      - description: DirFail interrupt
> +      - description: DataError interrupt
> +      - description: DataFail interrupt

This says DataFail is optional.

>  
>    reg:
>      maxItems: 1
> @@ -67,6 +76,26 @@ properties:
>        The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
>        The reserved memory node should be defined as per the bindings in reserved-memory.txt.
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: sifive,fu540-c000-ccache
> +
> +then:
> +  properties:
> +    interrupts:
> +      description: |
> +        Must contain entries for DirError, DataError and DataFail signals.
> +      maxItems: 3
> +
> +else:
> +  properties:
> +    interrupts:
> +      description: |
> +        Must contain entries for DirError, DirFail, DataError, DataFail signals.
> +      minItems: 4
> +
>  additionalProperties: false
>  
>  required:
> -- 
> 2.7.4
>