[PATCH v5 09/21] dt-bindings: pinctrl: Document canaan, k210-fpioa bindings
Damien Le Moal
damien.lemoal at wdc.com
Tue Dec 8 02:33:43 EST 2020
Document the device tree bindings for the Canaan Kendryte K210 SoC
Fully Programmable IO Array (FPIOA) pinctrl driver in
Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml. The
new header file include/dt-bindings/pinctrl/k210-fpioa.h is added to
define all 256 possible pin functions of the SoC IO pins, as well as
macros simplifying the definition of pin functions in a device tree.
Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
---
.../bindings/pinctrl/canaan,k210-fpioa.yaml | 171 +++++++++++
include/dt-bindings/pinctrl/k210-fpioa.h | 276 ++++++++++++++++++
2 files changed, 447 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
create mode 100644 include/dt-bindings/pinctrl/k210-fpioa.h
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
new file mode 100644
index 000000000000..30b850c3bf2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 FPIOA Device Tree Bindings
+
+maintainers:
+ - Damien Le Moal <damien.lemoal at wdc.com>
+
+description:
+ The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)
+ controller allows assiging any of 256 possible functions to any of
+ 48 IO pins of the SoC. Pin function configuration is performed on
+ a per-pin basis.
+
+properties:
+ compatible:
+ const: canaan,k210-fpioa
+
+ reg:
+ maxItems: 1
+ description:
+ Address and length of the register set for the FPIOA controller.
+
+ clocks:
+ items:
+ - description: Controller reference clock source
+ - description: APB interface clock source
+
+ clock-names:
+ items:
+ - const: ref
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+ canaan,k210-sysctl-power:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ phandle of the K210 system controller node and offset of its
+ power domain control register.
+
+patternProperties:
+ '-pinmux$':
+ type: object
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+ description:
+ FPIOA client devices use sub-nodes to define the desired pin
+ configuration. Client device sub-nodes use the pinux property
+ below.
+
+ properties:
+ pinmux:
+ description:
+ List of IO pins alternate functions. The values for each IO
+ pin is a combination of an IO pin number (0 to 47) with the
+ desired function for the IO pin. Functions are defined as
+ macros in include/dt-bindings/pinctrl/k210-fpioa.h.
+ The K210_FPIOA(IO pin, function) macro is provided to
+ facilitate the combination of IO pin numbers and functions.
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+ '-pins$':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+ description:
+ FPIOA client devices use sub-nodes to define the desired
+ configuration of pins. Client device sub-nodes use the
+ properties below.
+
+ properties:
+ pins:
+ description:
+ List of IO pins affected by the properties specified in this
+ subnode. IO pins are identified using the pin names "IO_xx".
+ Pin configuration nodes can also define the power domain to
+ be used for the SoC pin groups A0 (IO pins 0-5),
+ A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23),
+ B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35),
+ C0 (IO pins 36-41) and C1 (IO pins 42-47) using the
+ power-source property.
+ items:
+ anyOf:
+ - pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$"
+ - enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7,
+ IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14,
+ IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21,
+ IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28,
+ IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35,
+ IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42,
+ IO_43, IO_44, IO_45, IO_46, IO_47,
+ A0, A1, A2, B3, B4, B5, C6, C7 ]
+ bias-disable: true
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ drive-strength: true
+
+ drive-strength-microamp: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ intput-polarity-invert:
+ description:
+ Enable or disable pin input polarity inversion.
+
+ output-enable: true
+
+ output-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ output-polarity-invert:
+ description:
+ Enable or disable pin output polarity inversion.
+
+ slew-rate: true
+
+ power-source: true
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - canaan,k210-sysctl-power
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/k210-fpioa.h>
+ #include <dt-bindings/clock/k210-clk.h>
+ #include <dt-bindings/reset/k210-rst.h>
+
+ fpioa: pinmux at 502B0000 {
+ compatible = "canaan,k210-fpioa";
+ reg = <0x502B0000 0x100>;
+ clocks = <&sysclk K210_CLK_FPIOA>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "ref", "pclk";
+ resets = <&sysrst K210_RST_FPIOA>;
+ canaan,k210-sysctl-power = <&sysctl 108>;
+ pinctrl-0 = <&jtag_pinctrl>;
+ pinctrl-names = "default";
+
+ jtag_pinctrl: jtag-pinmux {
+ pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+ <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+ <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+ <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+ };
+ };
diff --git a/include/dt-bindings/pinctrl/k210-fpioa.h b/include/dt-bindings/pinctrl/k210-fpioa.h
new file mode 100644
index 000000000000..314285eab3a1
--- /dev/null
+++ b/include/dt-bindings/pinctrl/k210-fpioa.h
@@ -0,0 +1,276 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef PINCTRL_K210_FPIOA_H
+#define PINCTRL_K210_FPIOA_H
+
+/*
+ * Full list of FPIOA functions from
+ * kendryte-standalone-sdk/lib/drivers/include/fpioa.h
+ */
+#define K210_PCF_MASK GENMASK(7, 0)
+#define K210_PCF_JTAG_TCLK 0 /* JTAG Test Clock */
+#define K210_PCF_JTAG_TDI 1 /* JTAG Test Data In */
+#define K210_PCF_JTAG_TMS 2 /* JTAG Test Mode Select */
+#define K210_PCF_JTAG_TDO 3 /* JTAG Test Data Out */
+#define K210_PCF_SPI0_D0 4 /* SPI0 Data 0 */
+#define K210_PCF_SPI0_D1 5 /* SPI0 Data 1 */
+#define K210_PCF_SPI0_D2 6 /* SPI0 Data 2 */
+#define K210_PCF_SPI0_D3 7 /* SPI0 Data 3 */
+#define K210_PCF_SPI0_D4 8 /* SPI0 Data 4 */
+#define K210_PCF_SPI0_D5 9 /* SPI0 Data 5 */
+#define K210_PCF_SPI0_D6 10 /* SPI0 Data 6 */
+#define K210_PCF_SPI0_D7 11 /* SPI0 Data 7 */
+#define K210_PCF_SPI0_SS0 12 /* SPI0 Chip Select 0 */
+#define K210_PCF_SPI0_SS1 13 /* SPI0 Chip Select 1 */
+#define K210_PCF_SPI0_SS2 14 /* SPI0 Chip Select 2 */
+#define K210_PCF_SPI0_SS3 15 /* SPI0 Chip Select 3 */
+#define K210_PCF_SPI0_ARB 16 /* SPI0 Arbitration */
+#define K210_PCF_SPI0_SCLK 17 /* SPI0 Serial Clock */
+#define K210_PCF_UARTHS_RX 18 /* UART High speed Receiver */
+#define K210_PCF_UARTHS_TX 19 /* UART High speed Transmitter */
+#define K210_PCF_RESV6 20 /* Reserved function */
+#define K210_PCF_RESV7 21 /* Reserved function */
+#define K210_PCF_CLK_SPI1 22 /* Clock SPI1 */
+#define K210_PCF_CLK_I2C1 23 /* Clock I2C1 */
+#define K210_PCF_GPIOHS0 24 /* GPIO High speed 0 */
+#define K210_PCF_GPIOHS1 25 /* GPIO High speed 1 */
+#define K210_PCF_GPIOHS2 26 /* GPIO High speed 2 */
+#define K210_PCF_GPIOHS3 27 /* GPIO High speed 3 */
+#define K210_PCF_GPIOHS4 28 /* GPIO High speed 4 */
+#define K210_PCF_GPIOHS5 29 /* GPIO High speed 5 */
+#define K210_PCF_GPIOHS6 30 /* GPIO High speed 6 */
+#define K210_PCF_GPIOHS7 31 /* GPIO High speed 7 */
+#define K210_PCF_GPIOHS8 32 /* GPIO High speed 8 */
+#define K210_PCF_GPIOHS9 33 /* GPIO High speed 9 */
+#define K210_PCF_GPIOHS10 34 /* GPIO High speed 10 */
+#define K210_PCF_GPIOHS11 35 /* GPIO High speed 11 */
+#define K210_PCF_GPIOHS12 36 /* GPIO High speed 12 */
+#define K210_PCF_GPIOHS13 37 /* GPIO High speed 13 */
+#define K210_PCF_GPIOHS14 38 /* GPIO High speed 14 */
+#define K210_PCF_GPIOHS15 39 /* GPIO High speed 15 */
+#define K210_PCF_GPIOHS16 40 /* GPIO High speed 16 */
+#define K210_PCF_GPIOHS17 41 /* GPIO High speed 17 */
+#define K210_PCF_GPIOHS18 42 /* GPIO High speed 18 */
+#define K210_PCF_GPIOHS19 43 /* GPIO High speed 19 */
+#define K210_PCF_GPIOHS20 44 /* GPIO High speed 20 */
+#define K210_PCF_GPIOHS21 45 /* GPIO High speed 21 */
+#define K210_PCF_GPIOHS22 46 /* GPIO High speed 22 */
+#define K210_PCF_GPIOHS23 47 /* GPIO High speed 23 */
+#define K210_PCF_GPIOHS24 48 /* GPIO High speed 24 */
+#define K210_PCF_GPIOHS25 49 /* GPIO High speed 25 */
+#define K210_PCF_GPIOHS26 50 /* GPIO High speed 26 */
+#define K210_PCF_GPIOHS27 51 /* GPIO High speed 27 */
+#define K210_PCF_GPIOHS28 52 /* GPIO High speed 28 */
+#define K210_PCF_GPIOHS29 53 /* GPIO High speed 29 */
+#define K210_PCF_GPIOHS30 54 /* GPIO High speed 30 */
+#define K210_PCF_GPIOHS31 55 /* GPIO High speed 31 */
+#define K210_PCF_GPIO0 56 /* GPIO pin 0 */
+#define K210_PCF_GPIO1 57 /* GPIO pin 1 */
+#define K210_PCF_GPIO2 58 /* GPIO pin 2 */
+#define K210_PCF_GPIO3 59 /* GPIO pin 3 */
+#define K210_PCF_GPIO4 60 /* GPIO pin 4 */
+#define K210_PCF_GPIO5 61 /* GPIO pin 5 */
+#define K210_PCF_GPIO6 62 /* GPIO pin 6 */
+#define K210_PCF_GPIO7 63 /* GPIO pin 7 */
+#define K210_PCF_UART1_RX 64 /* UART1 Receiver */
+#define K210_PCF_UART1_TX 65 /* UART1 Transmitter */
+#define K210_PCF_UART2_RX 66 /* UART2 Receiver */
+#define K210_PCF_UART2_TX 67 /* UART2 Transmitter */
+#define K210_PCF_UART3_RX 68 /* UART3 Receiver */
+#define K210_PCF_UART3_TX 69 /* UART3 Transmitter */
+#define K210_PCF_SPI1_D0 70 /* SPI1 Data 0 */
+#define K210_PCF_SPI1_D1 71 /* SPI1 Data 1 */
+#define K210_PCF_SPI1_D2 72 /* SPI1 Data 2 */
+#define K210_PCF_SPI1_D3 73 /* SPI1 Data 3 */
+#define K210_PCF_SPI1_D4 74 /* SPI1 Data 4 */
+#define K210_PCF_SPI1_D5 75 /* SPI1 Data 5 */
+#define K210_PCF_SPI1_D6 76 /* SPI1 Data 6 */
+#define K210_PCF_SPI1_D7 77 /* SPI1 Data 7 */
+#define K210_PCF_SPI1_SS0 78 /* SPI1 Chip Select 0 */
+#define K210_PCF_SPI1_SS1 79 /* SPI1 Chip Select 1 */
+#define K210_PCF_SPI1_SS2 80 /* SPI1 Chip Select 2 */
+#define K210_PCF_SPI1_SS3 81 /* SPI1 Chip Select 3 */
+#define K210_PCF_SPI1_ARB 82 /* SPI1 Arbitration */
+#define K210_PCF_SPI1_SCLK 83 /* SPI1 Serial Clock */
+#define K210_PCF_SPI2_D0 84 /* SPI2 Data 0 */
+#define K210_PCF_SPI2_SS 85 /* SPI2 Select */
+#define K210_PCF_SPI2_SCLK 86 /* SPI2 Serial Clock */
+#define K210_PCF_I2S0_MCLK 87 /* I2S0 Master Clock */
+#define K210_PCF_I2S0_SCLK 88 /* I2S0 Serial Clock(BCLK) */
+#define K210_PCF_I2S0_WS 89 /* I2S0 Word Select(LRCLK) */
+#define K210_PCF_I2S0_IN_D0 90 /* I2S0 Serial Data Input 0 */
+#define K210_PCF_I2S0_IN_D1 91 /* I2S0 Serial Data Input 1 */
+#define K210_PCF_I2S0_IN_D2 92 /* I2S0 Serial Data Input 2 */
+#define K210_PCF_I2S0_IN_D3 93 /* I2S0 Serial Data Input 3 */
+#define K210_PCF_I2S0_OUT_D0 94 /* I2S0 Serial Data Output 0 */
+#define K210_PCF_I2S0_OUT_D1 95 /* I2S0 Serial Data Output 1 */
+#define K210_PCF_I2S0_OUT_D2 96 /* I2S0 Serial Data Output 2 */
+#define K210_PCF_I2S0_OUT_D3 97 /* I2S0 Serial Data Output 3 */
+#define K210_PCF_I2S1_MCLK 98 /* I2S1 Master Clock */
+#define K210_PCF_I2S1_SCLK 99 /* I2S1 Serial Clock(BCLK) */
+#define K210_PCF_I2S1_WS 100 /* I2S1 Word Select(LRCLK) */
+#define K210_PCF_I2S1_IN_D0 101 /* I2S1 Serial Data Input 0 */
+#define K210_PCF_I2S1_IN_D1 102 /* I2S1 Serial Data Input 1 */
+#define K210_PCF_I2S1_IN_D2 103 /* I2S1 Serial Data Input 2 */
+#define K210_PCF_I2S1_IN_D3 104 /* I2S1 Serial Data Input 3 */
+#define K210_PCF_I2S1_OUT_D0 105 /* I2S1 Serial Data Output 0 */
+#define K210_PCF_I2S1_OUT_D1 106 /* I2S1 Serial Data Output 1 */
+#define K210_PCF_I2S1_OUT_D2 107 /* I2S1 Serial Data Output 2 */
+#define K210_PCF_I2S1_OUT_D3 108 /* I2S1 Serial Data Output 3 */
+#define K210_PCF_I2S2_MCLK 109 /* I2S2 Master Clock */
+#define K210_PCF_I2S2_SCLK 110 /* I2S2 Serial Clock(BCLK) */
+#define K210_PCF_I2S2_WS 111 /* I2S2 Word Select(LRCLK) */
+#define K210_PCF_I2S2_IN_D0 112 /* I2S2 Serial Data Input 0 */
+#define K210_PCF_I2S2_IN_D1 113 /* I2S2 Serial Data Input 1 */
+#define K210_PCF_I2S2_IN_D2 114 /* I2S2 Serial Data Input 2 */
+#define K210_PCF_I2S2_IN_D3 115 /* I2S2 Serial Data Input 3 */
+#define K210_PCF_I2S2_OUT_D0 116 /* I2S2 Serial Data Output 0 */
+#define K210_PCF_I2S2_OUT_D1 117 /* I2S2 Serial Data Output 1 */
+#define K210_PCF_I2S2_OUT_D2 118 /* I2S2 Serial Data Output 2 */
+#define K210_PCF_I2S2_OUT_D3 119 /* I2S2 Serial Data Output 3 */
+#define K210_PCF_RESV0 120 /* Reserved function */
+#define K210_PCF_RESV1 121 /* Reserved function */
+#define K210_PCF_RESV2 122 /* Reserved function */
+#define K210_PCF_RESV3 123 /* Reserved function */
+#define K210_PCF_RESV4 124 /* Reserved function */
+#define K210_PCF_RESV5 125 /* Reserved function */
+#define K210_PCF_I2C0_SCLK 126 /* I2C0 Serial Clock */
+#define K210_PCF_I2C0_SDA 127 /* I2C0 Serial Data */
+#define K210_PCF_I2C1_SCLK 128 /* I2C1 Serial Clock */
+#define K210_PCF_I2C1_SDA 129 /* I2C1 Serial Data */
+#define K210_PCF_I2C2_SCLK 130 /* I2C2 Serial Clock */
+#define K210_PCF_I2C2_SDA 131 /* I2C2 Serial Data */
+#define K210_PCF_DVP_XCLK 132 /* DVP System Clock */
+#define K210_PCF_DVP_RST 133 /* DVP System Reset */
+#define K210_PCF_DVP_PWDN 134 /* DVP Power Down Mode */
+#define K210_PCF_DVP_VSYNC 135 /* DVP Vertical Sync */
+#define K210_PCF_DVP_HSYNC 136 /* DVP Horizontal Sync */
+#define K210_PCF_DVP_PCLK 137 /* Pixel Clock */
+#define K210_PCF_DVP_D0 138 /* Data Bit 0 */
+#define K210_PCF_DVP_D1 139 /* Data Bit 1 */
+#define K210_PCF_DVP_D2 140 /* Data Bit 2 */
+#define K210_PCF_DVP_D3 141 /* Data Bit 3 */
+#define K210_PCF_DVP_D4 142 /* Data Bit 4 */
+#define K210_PCF_DVP_D5 143 /* Data Bit 5 */
+#define K210_PCF_DVP_D6 144 /* Data Bit 6 */
+#define K210_PCF_DVP_D7 145 /* Data Bit 7 */
+#define K210_PCF_SCCB_SCLK 146 /* Serial Camera Control Bus Clock */
+#define K210_PCF_SCCB_SDA 147 /* Serial Camera Control Bus Data */
+#define K210_PCF_UART1_CTS 148 /* UART1 Clear To Send */
+#define K210_PCF_UART1_DSR 149 /* UART1 Data Set Ready */
+#define K210_PCF_UART1_DCD 150 /* UART1 Data Carrier Detect */
+#define K210_PCF_UART1_RI 151 /* UART1 Ring Indicator */
+#define K210_PCF_UART1_SIR_IN 152 /* UART1 Serial Infrared Input */
+#define K210_PCF_UART1_DTR 153 /* UART1 Data Terminal Ready */
+#define K210_PCF_UART1_RTS 154 /* UART1 Request To Send */
+#define K210_PCF_UART1_OUT2 155 /* UART1 User-designated Output 2 */
+#define K210_PCF_UART1_OUT1 156 /* UART1 User-designated Output 1 */
+#define K210_PCF_UART1_SIR_OUT 157 /* UART1 Serial Infrared Output */
+#define K210_PCF_UART1_BAUD 158 /* UART1 Transmit Clock Output */
+#define K210_PCF_UART1_RE 159 /* UART1 Receiver Output Enable */
+#define K210_PCF_UART1_DE 160 /* UART1 Driver Output Enable */
+#define K210_PCF_UART1_RS485_EN 161 /* UART1 RS485 Enable */
+#define K210_PCF_UART2_CTS 162 /* UART2 Clear To Send */
+#define K210_PCF_UART2_DSR 163 /* UART2 Data Set Ready */
+#define K210_PCF_UART2_DCD 164 /* UART2 Data Carrier Detect */
+#define K210_PCF_UART2_RI 165 /* UART2 Ring Indicator */
+#define K210_PCF_UART2_SIR_IN 166 /* UART2 Serial Infrared Input */
+#define K210_PCF_UART2_DTR 167 /* UART2 Data Terminal Ready */
+#define K210_PCF_UART2_RTS 168 /* UART2 Request To Send */
+#define K210_PCF_UART2_OUT2 169 /* UART2 User-designated Output 2 */
+#define K210_PCF_UART2_OUT1 170 /* UART2 User-designated Output 1 */
+#define K210_PCF_UART2_SIR_OUT 171 /* UART2 Serial Infrared Output */
+#define K210_PCF_UART2_BAUD 172 /* UART2 Transmit Clock Output */
+#define K210_PCF_UART2_RE 173 /* UART2 Receiver Output Enable */
+#define K210_PCF_UART2_DE 174 /* UART2 Driver Output Enable */
+#define K210_PCF_UART2_RS485_EN 175 /* UART2 RS485 Enable */
+#define K210_PCF_UART3_CTS 176 /* UART3 Clear To Send */
+#define K210_PCF_UART3_DSR 177 /* UART3 Data Set Ready */
+#define K210_PCF_UART3_DCD 178 /* UART3 Data Carrier Detect */
+#define K210_PCF_UART3_RI 179 /* UART3 Ring Indicator */
+#define K210_PCF_UART3_SIR_IN 180 /* UART3 Serial Infrared Input */
+#define K210_PCF_UART3_DTR 181 /* UART3 Data Terminal Ready */
+#define K210_PCF_UART3_RTS 182 /* UART3 Request To Send */
+#define K210_PCF_UART3_OUT2 183 /* UART3 User-designated Output 2 */
+#define K210_PCF_UART3_OUT1 184 /* UART3 User-designated Output 1 */
+#define K210_PCF_UART3_SIR_OUT 185 /* UART3 Serial Infrared Output */
+#define K210_PCF_UART3_BAUD 186 /* UART3 Transmit Clock Output */
+#define K210_PCF_UART3_RE 187 /* UART3 Receiver Output Enable */
+#define K210_PCF_UART3_DE 188 /* UART3 Driver Output Enable */
+#define K210_PCF_UART3_RS485_EN 189 /* UART3 RS485 Enable */
+#define K210_PCF_TIMER0_TOGGLE1 190 /* TIMER0 Toggle Output 1 */
+#define K210_PCF_TIMER0_TOGGLE2 191 /* TIMER0 Toggle Output 2 */
+#define K210_PCF_TIMER0_TOGGLE3 192 /* TIMER0 Toggle Output 3 */
+#define K210_PCF_TIMER0_TOGGLE4 193 /* TIMER0 Toggle Output 4 */
+#define K210_PCF_TIMER1_TOGGLE1 194 /* TIMER1 Toggle Output 1 */
+#define K210_PCF_TIMER1_TOGGLE2 195 /* TIMER1 Toggle Output 2 */
+#define K210_PCF_TIMER1_TOGGLE3 196 /* TIMER1 Toggle Output 3 */
+#define K210_PCF_TIMER1_TOGGLE4 197 /* TIMER1 Toggle Output 4 */
+#define K210_PCF_TIMER2_TOGGLE1 198 /* TIMER2 Toggle Output 1 */
+#define K210_PCF_TIMER2_TOGGLE2 199 /* TIMER2 Toggle Output 2 */
+#define K210_PCF_TIMER2_TOGGLE3 200 /* TIMER2 Toggle Output 3 */
+#define K210_PCF_TIMER2_TOGGLE4 201 /* TIMER2 Toggle Output 4 */
+#define K210_PCF_CLK_SPI2 202 /* Clock SPI2 */
+#define K210_PCF_CLK_I2C2 203 /* Clock I2C2 */
+#define K210_PCF_INTERNAL0 204 /* Internal function signal 0 */
+#define K210_PCF_INTERNAL1 205 /* Internal function signal 1 */
+#define K210_PCF_INTERNAL2 206 /* Internal function signal 2 */
+#define K210_PCF_INTERNAL3 207 /* Internal function signal 3 */
+#define K210_PCF_INTERNAL4 208 /* Internal function signal 4 */
+#define K210_PCF_INTERNAL5 209 /* Internal function signal 5 */
+#define K210_PCF_INTERNAL6 210 /* Internal function signal 6 */
+#define K210_PCF_INTERNAL7 211 /* Internal function signal 7 */
+#define K210_PCF_INTERNAL8 212 /* Internal function signal 8 */
+#define K210_PCF_INTERNAL9 213 /* Internal function signal 9 */
+#define K210_PCF_INTERNAL10 214 /* Internal function signal 10 */
+#define K210_PCF_INTERNAL11 215 /* Internal function signal 11 */
+#define K210_PCF_INTERNAL12 216 /* Internal function signal 12 */
+#define K210_PCF_INTERNAL13 217 /* Internal function signal 13 */
+#define K210_PCF_INTERNAL14 218 /* Internal function signal 14 */
+#define K210_PCF_INTERNAL15 219 /* Internal function signal 15 */
+#define K210_PCF_INTERNAL16 220 /* Internal function signal 16 */
+#define K210_PCF_INTERNAL17 221 /* Internal function signal 17 */
+#define K210_PCF_CONSTANT 222 /* Constant function */
+#define K210_PCF_INTERNAL18 223 /* Internal function signal 18 */
+#define K210_PCF_DEBUG0 224 /* Debug function 0 */
+#define K210_PCF_DEBUG1 225 /* Debug function 1 */
+#define K210_PCF_DEBUG2 226 /* Debug function 2 */
+#define K210_PCF_DEBUG3 227 /* Debug function 3 */
+#define K210_PCF_DEBUG4 228 /* Debug function 4 */
+#define K210_PCF_DEBUG5 229 /* Debug function 5 */
+#define K210_PCF_DEBUG6 230 /* Debug function 6 */
+#define K210_PCF_DEBUG7 231 /* Debug function 7 */
+#define K210_PCF_DEBUG8 232 /* Debug function 8 */
+#define K210_PCF_DEBUG9 233 /* Debug function 9 */
+#define K210_PCF_DEBUG10 234 /* Debug function 10 */
+#define K210_PCF_DEBUG11 235 /* Debug function 11 */
+#define K210_PCF_DEBUG12 236 /* Debug function 12 */
+#define K210_PCF_DEBUG13 237 /* Debug function 13 */
+#define K210_PCF_DEBUG14 238 /* Debug function 14 */
+#define K210_PCF_DEBUG15 239 /* Debug function 15 */
+#define K210_PCF_DEBUG16 240 /* Debug function 16 */
+#define K210_PCF_DEBUG17 241 /* Debug function 17 */
+#define K210_PCF_DEBUG18 242 /* Debug function 18 */
+#define K210_PCF_DEBUG19 243 /* Debug function 19 */
+#define K210_PCF_DEBUG20 244 /* Debug function 20 */
+#define K210_PCF_DEBUG21 245 /* Debug function 21 */
+#define K210_PCF_DEBUG22 246 /* Debug function 22 */
+#define K210_PCF_DEBUG23 247 /* Debug function 23 */
+#define K210_PCF_DEBUG24 248 /* Debug function 24 */
+#define K210_PCF_DEBUG25 249 /* Debug function 25 */
+#define K210_PCF_DEBUG26 250 /* Debug function 26 */
+#define K210_PCF_DEBUG27 251 /* Debug function 27 */
+#define K210_PCF_DEBUG28 252 /* Debug function 28 */
+#define K210_PCF_DEBUG29 253 /* Debug function 29 */
+#define K210_PCF_DEBUG30 254 /* Debug function 30 */
+#define K210_PCF_DEBUG31 255 /* Debug function 31 */
+
+#define K210_FPIOA(pin, func) (((pin) << 16) | (func))
+
+#define K210_PC_POWER_3V3 0
+#define K210_PC_POWER_1V8 1
+
+#endif /* PINCTRL_K210_FPIOA_H */
--
2.28.0
More information about the linux-riscv
mailing list