[RFC/RFT PATCH 1/6] numa: Move numa implementation to common code

Jonathan Cameron Jonathan.Cameron at Huawei.com
Fri Aug 28 05:22:33 EDT 2020


On Fri, 14 Aug 2020 14:47:20 -0700
Atish Patra <atish.patra at wdc.com> wrote:

> ARM64 numa implementation is generic enough that RISC-V can reuse that
> implementation with very minor cosmetic changes. This will help both
> ARM64 and RISC-V in terms of maintanace and feature improvement
> 
> Move the numa implementation code to common directory so that both ISAs
> can reuse this. This doesn't introduce any function changes for ARM64.
> 
> Signed-off-by: Atish Patra <atish.patra at wdc.com>
Hi Atish,

One trivial question inline.  Otherwise subject to Anshuman's point about
location, this looks fine to me.

I'll run some sanity checks later.

Jonathan
> ---
>  arch/arm64/Kconfig                            |  1 +
>  arch/arm64/include/asm/numa.h                 | 45 +---------------
>  arch/arm64/mm/Makefile                        |  1 -
>  drivers/base/Kconfig                          |  6 +++
>  drivers/base/Makefile                         |  1 +
>  .../mm/numa.c => drivers/base/arch_numa.c     |  0
>  include/asm-generic/numa.h                    | 51 +++++++++++++++++++
>  7 files changed, 60 insertions(+), 45 deletions(-)
>  rename arch/arm64/mm/numa.c => drivers/base/arch_numa.c (100%)
>  create mode 100644 include/asm-generic/numa.h
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 6d232837cbee..955a0cf75b16 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -960,6 +960,7 @@ config HOTPLUG_CPU
>  # Common NUMA Features
>  config NUMA
>  	bool "NUMA Memory Allocation and Scheduler Support"
> +	select GENERIC_ARCH_NUMA
>  	select ACPI_NUMA if ACPI
>  	select OF_NUMA
>  	help
> diff --git a/arch/arm64/include/asm/numa.h b/arch/arm64/include/asm/numa.h
> index 626ad01e83bf..8c8cf4297cc3 100644
> --- a/arch/arm64/include/asm/numa.h
> +++ b/arch/arm64/include/asm/numa.h
> @@ -3,49 +3,6 @@
>  #define __ASM_NUMA_H
>  
>  #include <asm/topology.h>
> -
> -#ifdef CONFIG_NUMA
> -
> -#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
> -
> -int __node_distance(int from, int to);
> -#define node_distance(a, b) __node_distance(a, b)
> -
> -extern nodemask_t numa_nodes_parsed __initdata;
> -
> -extern bool numa_off;
> -
> -/* Mappings between node number and cpus on that node. */
> -extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
> -void numa_clear_node(unsigned int cpu);
> -
> -#ifdef CONFIG_DEBUG_PER_CPU_MAPS
> -const struct cpumask *cpumask_of_node(int node);
> -#else
> -/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
> -static inline const struct cpumask *cpumask_of_node(int node)
> -{
> -	return node_to_cpumask_map[node];
> -}
> -#endif
> -
> -void __init arm64_numa_init(void);
> -int __init numa_add_memblk(int nodeid, u64 start, u64 end);
> -void __init numa_set_distance(int from, int to, int distance);
> -void __init numa_free_distance(void);
> -void __init early_map_cpu_to_node(unsigned int cpu, int nid);
> -void numa_store_cpu_info(unsigned int cpu);
> -void numa_add_cpu(unsigned int cpu);
> -void numa_remove_cpu(unsigned int cpu);
> -
> -#else	/* CONFIG_NUMA */
> -
> -static inline void numa_store_cpu_info(unsigned int cpu) { }
> -static inline void numa_add_cpu(unsigned int cpu) { }
> -static inline void numa_remove_cpu(unsigned int cpu) { }
> -static inline void arm64_numa_init(void) { }
> -static inline void early_map_cpu_to_node(unsigned int cpu, int nid) { }
> -
> -#endif	/* CONFIG_NUMA */
> +#include <asm-generic/numa.h>
>  
>  #endif	/* __ASM_NUMA_H */
> diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
> index d91030f0ffee..928c308b044b 100644
> --- a/arch/arm64/mm/Makefile
> +++ b/arch/arm64/mm/Makefile
> @@ -6,7 +6,6 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
>  obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
>  obj-$(CONFIG_PTDUMP_CORE)	+= dump.o
>  obj-$(CONFIG_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
> -obj-$(CONFIG_NUMA)		+= numa.o
>  obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
>  KASAN_SANITIZE_physaddr.o	+= n
>  
> diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> index 8d7001712062..73c2151de194 100644
> --- a/drivers/base/Kconfig
> +++ b/drivers/base/Kconfig
> @@ -210,4 +210,10 @@ config GENERIC_ARCH_TOPOLOGY
>  	  appropriate scaling, sysfs interface for reading capacity values at
>  	  runtime.
>  
> +config GENERIC_ARCH_NUMA
> +	bool
> +	help
> +	  Enable support for generic numa implementation. Currently, RISC-V
> +	  and ARM64 uses it.
> +
>  endmenu
> diff --git a/drivers/base/Makefile b/drivers/base/Makefile
> index 157452080f3d..c3d02c644222 100644
> --- a/drivers/base/Makefile
> +++ b/drivers/base/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl.o
>  obj-$(CONFIG_DEV_COREDUMP) += devcoredump.o
>  obj-$(CONFIG_GENERIC_MSI_IRQ_DOMAIN) += platform-msi.o
>  obj-$(CONFIG_GENERIC_ARCH_TOPOLOGY) += arch_topology.o
> +obj-$(CONFIG_GENERIC_ARCH_NUMA) += arch_numa.o
>  
>  obj-y			+= test/
>  
> diff --git a/arch/arm64/mm/numa.c b/drivers/base/arch_numa.c
> similarity index 100%
> rename from arch/arm64/mm/numa.c
> rename to drivers/base/arch_numa.c
> diff --git a/include/asm-generic/numa.h b/include/asm-generic/numa.h
> new file mode 100644
> index 000000000000..0635c0724b7c
> --- /dev/null
> +++ b/include/asm-generic/numa.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __ASM_GENERIC_NUMA_H
> +#define __ASM_GENERIC_NUMA_H
> +
> +#ifdef CONFIG_NUMA
> +
> +#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
> +
> +int __node_distance(int from, int to);
> +#define node_distance(a, b) __node_distance(a, b)
> +
> +extern nodemask_t numa_nodes_parsed __initdata;
> +
> +extern bool numa_off;
> +
> +/* Mappings between node number and cpus on that node. */
> +extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
> +void numa_clear_node(unsigned int cpu);
> +
> +#ifdef CONFIG_DEBUG_PER_CPU_MAPS
> +const struct cpumask *cpumask_of_node(int node);
> +#else
> +/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
> +static inline const struct cpumask *cpumask_of_node(int node)
> +{
> +	return node_to_cpumask_map[node];
> +}
> +#endif
> +
> +void __init arm64_numa_init(void);
> +int __init numa_add_memblk(int nodeid, u64 start, u64 end);
> +void __init numa_set_distance(int from, int to, int distance);
> +void __init numa_free_distance(void);
> +void __init early_map_cpu_to_node(unsigned int cpu, int nid);
> +void numa_store_cpu_info(unsigned int cpu);
> +void numa_add_cpu(unsigned int cpu);
> +void numa_remove_cpu(unsigned int cpu);
> +
> +#else	/* CONFIG_NUMA */
> +
> +static inline void numa_store_cpu_info(unsigned int cpu) { }
> +static inline void numa_add_cpu(unsigned int cpu) { }
> +static inline void numa_remove_cpu(unsigned int cpu) { }
> +static inline void arm64_numa_init(void) { }
> +static inline void early_map_cpu_to_node(unsigned int cpu, int nid) { }
> +
> +#endif	/* CONFIG_NUMA */
> +
> +#include <asm/topology.h>

Why the include here?

> +
> +#endif	/* __ASM_GENERIC_NUMA_H */





More information about the linux-riscv mailing list