[PATCH v6 0/9] Add UEFI support for RISC-V

Ard Biesheuvel ardb at kernel.org
Wed Aug 26 07:22:07 EDT 2020


On Tue, 25 Aug 2020 at 20:04, Palmer Dabbelt <palmer at dabbelt.com> wrote:
>
> On Wed, 19 Aug 2020 15:24:16 PDT (-0700), Atish Patra wrote:
> > This series adds UEFI support for RISC-V.
> >
> > Linux kernel: v5.9-rc1
> > U-Boot: v2020.07
> > OpenSBI: master
> >
> > Patch 1-3 are generic riscv feature addition required for UEFI support.
> > Patch 4-7 adds the efi stub support for RISC-V which was reviewed few months back.
> > https://www.spinics.net/lists/linux-efi/msg19144.html
> > Patch 8 just renames arm-init code so that it can be used across different
> > architectures.
> > Patch 9 adds the runtime services for RISC-V.
> >
> > The working set of patches can also be found in following git repo.
> > https://github.com/atishp04/linux/tree/uefi_riscv_5.10_v6
> >
> > The patches have been verified on following platforms:
> > 1. Qemu (both RV32 & RV64) for the following bootflow
> >    OpenSBI->U-Boot->Linux
> >    EDK2->Linux
> > 2. HiFive unleashed using (RV64) for the following bootflow
> >    OpenSBI->U-Boot->Linux
> >    EDK2->Linux
> >
> > Thanks Abner & Daniel for all work done for EDK2.
> > The EDK2 instructions are available here.
> > https://github.com/JohnAZoidberg/riscv-edk2-docker/
> >
> > Note:
> > 1. Currently, EDK2 RISC-V port doesn't support OVMF package. That's why
> > EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should be enabled to load initrd via
> > commandline until OVMF patches are available.
> >
> > 2. For RV32, maximum allocated memory should be 1G as RISC-V kernel can not map
> > beyond 1G of physical memory for RV32.
> >
> > 3. Runtime services have been verified with fwts on EDK2.
> >
> > ***********************************************************************
> > [root at fedora-riscv ~]# fwts uefirtvariable
> > Running 1 tests, results appended to results.log
> > Test: UEFI Runtime service variable interface tests.
> >   Test UEFI RT service get variable interface.            1 passed
> >   Test UEFI RT service get next variable name interface.  4 passed
> >   Test UEFI RT service set variable interface.            7 passed, 1 warning
> >   Test UEFI RT service query variable info interface.     1 passed
> >   Test UEFI RT service variable interface stress test.    2 passed
> >   Test UEFI RT service set variable interface stress t..  4 passed
> >   Test UEFI RT service query variable info interface s..  1 passed
> >   Test UEFI RT service get variable interface, invalid..  5 passed
> >   Test UEFI RT variable services supported status.        1 skipped
> >
> > Test           |Pass |Fail |Abort|Warn |Skip |Info |
> > uefirtvariable |   25|     |     |    1|    1|     |
> > Total:         |   25|    0|    0|    1|    1|    0|
> >
> > ***********************************************************************
> >
> > Changes from v5->v6:
> > 1. Fixed the static declaration for pt_ops.
> > 2. Added Reviewed/Acked-by.
> >
> > Changes from v4->v5:
> > 1. Late mappings allocations are now done through function pointers.
> > 2. EFI run time services are verified using full linux boot and fwts using EDK2.
> >
> > Changes from v3->v4:
> > 1. Used pgd mapping to avoid copying DT to bss.
> >
> > Changes from v2->v3:
> > 1. Fixed few bugs in run time services page table mapping.
> > 2. Dropped patch 1 as it is already taken into efi-tree.
> > 3. Sent few generic mmu fixes as a separate series to ease the merge conflicts.
> >
> > Changes from v1->v2:
> > 1. Removed patch 1 as it is already taken into efi-tree.
> > 2. Fixed compilation issues with patch 9.
> > 3. Moved few function prototype declaration to header file to keep kbuild happy.
> >
> > Changes from previous version:
> > 1. Added full ioremap support.
> > 2. Added efi runtime services support.
> > 3. Fixes mm issues
> >
> > Anup Patel (1):
> > RISC-V: Move DT mapping outof fixmap
> >
> > Atish Patra (8):
> > RISC-V: Add early ioremap support
> > RISC-V: Implement late mapping page table allocation functions
> > include: pe.h: Add RISC-V related PE definition
> > RISC-V: Add PE/COFF header for EFI stub
> > RISC-V: Add EFI stub support.
> > efi: Rename arm-init to efi-init common for all arch
> > RISC-V: Add EFI runtime services
> > RISC-V: Add page table dump support for uefi
> >
> > arch/riscv/Kconfig                            |  25 +++
> > arch/riscv/Makefile                           |   1 +
> > arch/riscv/configs/defconfig                  |   1 +
> > arch/riscv/include/asm/Kbuild                 |   1 +
> > arch/riscv/include/asm/efi.h                  |  56 +++++
> > arch/riscv/include/asm/fixmap.h               |  16 +-
> > arch/riscv/include/asm/io.h                   |   1 +
> > arch/riscv/include/asm/mmu.h                  |   2 +
> > arch/riscv/include/asm/pgtable.h              |   5 +
> > arch/riscv/include/asm/sections.h             |  13 ++
> > arch/riscv/kernel/Makefile                    |   5 +
> > arch/riscv/kernel/efi-header.S                | 104 ++++++++++
> > arch/riscv/kernel/efi.c                       | 105 ++++++++++
> > arch/riscv/kernel/head.S                      |  17 +-
> > arch/riscv/kernel/head.h                      |   2 -
> > arch/riscv/kernel/image-vars.h                |  51 +++++
> > arch/riscv/kernel/setup.c                     |  17 +-
> > arch/riscv/kernel/vmlinux.lds.S               |  22 +-
> > arch/riscv/mm/init.c                          | 191 +++++++++++++-----
> > arch/riscv/mm/ptdump.c                        |  48 ++++-
> > drivers/firmware/efi/Kconfig                  |   3 +-
> > drivers/firmware/efi/Makefile                 |   4 +-
> > .../firmware/efi/{arm-init.c => efi-init.c}   |   0
> > drivers/firmware/efi/libstub/Makefile         |  10 +
> > drivers/firmware/efi/libstub/efi-stub.c       |  11 +-
> > drivers/firmware/efi/libstub/riscv-stub.c     | 110 ++++++++++
> > drivers/firmware/efi/riscv-runtime.c          | 143 +++++++++++++
> > include/linux/pe.h                            |   3 +
> > 28 files changed, 900 insertions(+), 67 deletions(-)
> > create mode 100644 arch/riscv/include/asm/efi.h
> > create mode 100644 arch/riscv/include/asm/sections.h
> > create mode 100644 arch/riscv/kernel/efi-header.S
> > create mode 100644 arch/riscv/kernel/efi.c
> > create mode 100644 arch/riscv/kernel/image-vars.h
> > rename drivers/firmware/efi/{arm-init.c => efi-init.c} (100%)
> > create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
> > create mode 100644 drivers/firmware/efi/riscv-runtime.c
>
> I've put these on for-next.  It's still pretty early in the cycle so there's
> some time to fix stuff up, but it looks like we've pretty much come to
> consensus on this.
>

I requested the following when acking these changes:

"""
Note to the maintainer: to the extent possible, please put the patches
in this series that touch drivers/firmware/efi on a separate branch
based on v5.9-rc1, and merge that into your for-v5.10 branch at the
appropriate spot. I don't have anything queued in the EFI tree at the
moment, and so these changes can happily go through the riscv tree, as
long as I am not forced to merge a bunch of unrelated changes on the
off chance that something does come up.
"""

Something has come up, and given that the patch

efi: Rename arm-init to efi-init common for all arch

lives on your for-next branch after a bunch of RISCV changes, I cannot
merge anything for EFI without pulling all of that into the EFI tree
as well.

Also, it is not clear to me whether the current ordering does not
break bisect, given that efi-init.o is referenced in patch #8 but is
not created until patch #9

So could you please do the following:

- drop 'efi: Rename arm-init to efi-init common for all arch' from the
top of your for-next branch
- create a separate topic branch that carries the dropped patch
- recreate the for-next branch so the topic branch is merged into it
at the right spot (i.e., before patch #8)

That way, I can merge your topic branch into the EFI tree as well, and
apply the other EFI changes on top of it.

Thanks,
Ard.



More information about the linux-riscv mailing list