[PATCH] riscv: Setup exception vector for K210 properly
Atish Patra
atishp at atishpatra.org
Tue Aug 11 14:45:52 EDT 2020
On Tue, Aug 11, 2020 at 1:41 AM Anup Patel <anup at brainfault.org> wrote:
>
> On Tue, Aug 11, 2020 at 12:07 PM Qiu Wenbo <qiuwenbo at phytium.com.cn> wrote:
> >
> > Exception vector is missing on nommu platform and it is a big issue.
> > This patch is tested in Sipeed MAIX Bit Dev Board.
> >
> > Fixes: 79b1feba5455 ("RISC-V: Setup exception vector early")
> > Signed-off-by: Qiu Wenbo <qiuwenbo at phytium.com.cn>
Thanks for testing it on the kendryte board.
> > ---
> > arch/riscv/kernel/smpboot.c | 1 +
> > arch/riscv/kernel/traps.c | 11 ++++++++++-
> > 2 files changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
> > index 356825a57551..23cde0ceb39d 100644
> > --- a/arch/riscv/kernel/smpboot.c
> > +++ b/arch/riscv/kernel/smpboot.c
> > @@ -154,6 +154,7 @@ asmlinkage __visible void smp_callin(void)
> > mmgrab(mm);
> > current->active_mm = mm;
> >
> > + trap_init();
> > notify_cpu_starting(curr_cpuid);
> > update_siblings_masks(curr_cpuid);
> > set_cpu_online(curr_cpuid, 1);
> > diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
> > index ad14f4466d92..a390239818ae 100644
> > --- a/arch/riscv/kernel/traps.c
> > +++ b/arch/riscv/kernel/traps.c
> > @@ -174,7 +174,16 @@ int is_valid_bugaddr(unsigned long pc)
> > }
> > #endif /* CONFIG_GENERIC_BUG */
> >
> > -/* stvec & scratch is already set from head.S */
> > +/* stvec & scratch is already set from head.S when mmu is enabled */
> > void trap_init(void)
> > {
> > +#ifndef CONFIG_MMU
> > + /*
> > + * Set sup0 scratch register to 0, indicating to exception vector
> > + * that we are presently executing in the kernel
> > + */
> > + csr_write(CSR_SCRATCH, 0);
> > + /* Set the exception vector address */
> > + csr_write(CSR_TVEC, &handle_exception);
> > +#endif
> > }
> > --
> > 2.28.0
> >
>
> This issue seems to be only on the latest master branch of
> Linux stable tree so this fix need not be a stable fix.
>
> For MMU kernel, the CSR_TVEC is setup in relocate() function
> called from secondary_start_common() function of head.S
>
> For NoMMU kernel, we should set CSR_TVEC directly in
> secondary_start_common() function as "#else" case of the
> "#ifdef CONFIG_MMU".
>
That would enable the trap only for secondary harts. But the exception
vector on boot hart
is still uninitialized. How about this change ?
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index d0c5c316e9bb..7822054dbd88 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -77,16 +77,6 @@ relocate:
csrw CSR_SATP, a0
.align 2
1:
- /* Set trap vector to exception handler */
- la a0, handle_exception
- csrw CSR_TVEC, a0
-
- /*
- * Set sup0 scratch register to 0, indicating to exception vector that
- * we are presently executing in kernel.
- */
- csrw CSR_SCRATCH, zero
-
/* Reload the global pointer */
.option push
.option norelax
@@ -144,9 +134,23 @@ secondary_start_common:
la a0, swapper_pg_dir
call relocate
#endif
+ call setup_trap_vector
tail smp_callin
#endif /* CONFIG_SMP */
+.align 2
+setup_trap_vector:
+ /* Set trap vector to exception handler */
+ la a0, handle_exception
+ csrw CSR_TVEC, a0
+
+ /*
+ * Set sup0 scratch register to 0, indicating to exception vector that
+ * we are presently executing in kernel.
+ */
+ csrw CSR_SCRATCH, zero
+ ret
+
.Lsecondary_park:
/* We lack SMP support or have too many harts, so park this hart */
wfi
@@ -240,6 +244,7 @@ clear_bss_done:
call relocate
#endif /* CONFIG_MMU */
+ call setup_trap_vector
/* Restore C environment */
la tp, init_task
sw zero, TASK_TI_CPU(tp)
> Regards,
> Anup
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
--
Regards,
Atish
More information about the linux-riscv
mailing list