[PATCH v6 3/4] RISC-V: Remove CLINT related code from timer and arch
Palmer Dabbelt
palmer at dabbelt.com
Tue Aug 4 21:47:54 EDT 2020
On Fri, 24 Jul 2020 00:18:21 PDT (-0700), Anup Patel wrote:
> Right now the RISC-V timer driver is convoluted to support:
> 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
> clocksource and SBI timer calls for clockevent device.
> 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
> counter register for clocksource and CLINT MMIO compare register
> for clockevent device.
>
> We now have a separate CLINT timer driver which also provide CLINT
> based IPI operations so let's remove CLINT MMIO related code from
> arch/riscv directory and RISC-V timer driver.
>
> Signed-off-by: Anup Patel <anup.patel at wdc.com>
> Tested-by: Emil Renner Berhing <kernel at esmil.dk>
> Acked-by: Daniel Lezcano <daniel.lezcano at linaro.org>
> ---
> arch/riscv/Kconfig | 2 +-
> arch/riscv/Kconfig.socs | 2 +
> arch/riscv/configs/nommu_virt_defconfig | 7 +--
> arch/riscv/include/asm/clint.h | 14 ------
> arch/riscv/include/asm/timex.h | 28 +++--------
> arch/riscv/kernel/Makefile | 2 +-
> arch/riscv/kernel/clint.c | 63 -------------------------
> arch/riscv/kernel/setup.c | 2 -
> arch/riscv/kernel/smp.c | 1 -
> arch/riscv/kernel/smpboot.c | 1 -
> drivers/clocksource/Kconfig | 3 +-
> drivers/clocksource/timer-riscv.c | 17 +------
> 12 files changed, 16 insertions(+), 126 deletions(-)
> delete mode 100644 arch/riscv/include/asm/clint.h
> delete mode 100644 arch/riscv/kernel/clint.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index fedb4a72b29a..57a72ae23d10 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -74,7 +74,7 @@ config RISCV
> select PCI_DOMAINS_GENERIC if PCI
> select PCI_MSI if PCI
> select RISCV_INTC
> - select RISCV_TIMER
> + select RISCV_TIMER if RISCV_SBI
> select SPARSEMEM_STATIC if 32BIT
> select SPARSE_IRQ
> select SYSCTL_EXCEPTION_TRACE
> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> index 6c88148f1b9b..8a55f6156661 100644
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -12,6 +12,7 @@ config SOC_SIFIVE
>
> config SOC_VIRT
> bool "QEMU Virt Machine"
> + select CLINT_TIMER if RISCV_M_MODE
> select POWER_RESET
> select POWER_RESET_SYSCON
> select POWER_RESET_SYSCON_POWEROFF
> @@ -24,6 +25,7 @@ config SOC_VIRT
> config SOC_KENDRYTE
> bool "Kendryte K210 SoC"
> depends on !MMU
> + select CLINT_TIMER if RISCV_M_MODE
> select SERIAL_SIFIVE if TTY
> select SERIAL_SIFIVE_CONSOLE if TTY
> select SIFIVE_PLIC
> diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig
> index cf74e179bf90..cf9388184aa3 100644
> --- a/arch/riscv/configs/nommu_virt_defconfig
> +++ b/arch/riscv/configs/nommu_virt_defconfig
> @@ -26,6 +26,7 @@ CONFIG_EXPERT=y
> CONFIG_SLOB=y
> # CONFIG_SLAB_MERGE_DEFAULT is not set
> # CONFIG_MMU is not set
> +CONFIG_SOC_VIRT=y
> CONFIG_MAXPHYSMEM_2GB=y
> CONFIG_SMP=y
> CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
> @@ -48,7 +49,6 @@ CONFIG_VIRTIO_BLK=y
> # CONFIG_SERIO is not set
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_LDISC_AUTOLOAD is not set
> -# CONFIG_DEVMEM is not set
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
> CONFIG_SERIAL_8250_CONSOLE=y
> @@ -56,16 +56,13 @@ CONFIG_SERIAL_8250_NR_UARTS=1
> CONFIG_SERIAL_8250_RUNTIME_UARTS=1
> CONFIG_SERIAL_OF_PLATFORM=y
> # CONFIG_HW_RANDOM is not set
> +# CONFIG_DEVMEM is not set
> # CONFIG_HWMON is not set
> -# CONFIG_LCD_CLASS_DEVICE is not set
> -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
> # CONFIG_VGA_CONSOLE is not set
> # CONFIG_HID is not set
> # CONFIG_USB_SUPPORT is not set
> CONFIG_VIRTIO_MMIO=y
> CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
> -CONFIG_SIFIVE_PLIC=y
> -# CONFIG_VALIDATE_FS_PARSER is not set
> CONFIG_EXT2_FS=y
> # CONFIG_DNOTIFY is not set
> # CONFIG_INOTIFY_USER is not set
> diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
> deleted file mode 100644
> index adaba98a7d6c..000000000000
> --- a/arch/riscv/include/asm/clint.h
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef _ASM_RISCV_CLINT_H
> -#define _ASM_RISCV_CLINT_H 1
> -
> -#include <linux/io.h>
> -#include <linux/smp.h>
> -
> -#ifdef CONFIG_RISCV_M_MODE
> -void clint_init_boot_cpu(void);
> -#else /* CONFIG_RISCV_M_MODE */
> -#define clint_init_boot_cpu() do { } while (0)
> -#endif /* CONFIG_RISCV_M_MODE */
> -
> -#endif /* _ASM_RISCV_CLINT_H */
> diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
> index bad2a7c2cda5..a3fb85d505d4 100644
> --- a/arch/riscv/include/asm/timex.h
> +++ b/arch/riscv/include/asm/timex.h
> @@ -7,41 +7,27 @@
> #define _ASM_RISCV_TIMEX_H
>
> #include <asm/csr.h>
> -#include <asm/mmio.h>
>
> typedef unsigned long cycles_t;
>
> -extern u64 __iomem *riscv_time_val;
> -extern u64 __iomem *riscv_time_cmp;
> -
> -#ifdef CONFIG_64BIT
> -#define mmio_get_cycles() readq_relaxed(riscv_time_val)
> -#else
> -#define mmio_get_cycles() readl_relaxed(riscv_time_val)
> -#define mmio_get_cycles_hi() readl_relaxed(((u32 *)riscv_time_val) + 1)
> -#endif
> -
> static inline cycles_t get_cycles(void)
> {
> - if (IS_ENABLED(CONFIG_RISCV_SBI))
> - return csr_read(CSR_TIME);
> - return mmio_get_cycles();
> + return csr_read(CSR_TIME);
> }
> #define get_cycles get_cycles
>
> +static inline u32 get_cycles_hi(void)
> +{
> + return csr_read(CSR_TIMEH);
> +}
> +#define get_cycles_hi get_cycles_hi
> +
> #ifdef CONFIG_64BIT
> static inline u64 get_cycles64(void)
> {
> return get_cycles();
> }
> #else /* CONFIG_64BIT */
> -static inline u32 get_cycles_hi(void)
> -{
> - if (IS_ENABLED(CONFIG_RISCV_SBI))
> - return csr_read(CSR_TIMEH);
> - return mmio_get_cycles_hi();
> -}
> -
> static inline u64 get_cycles64(void)
> {
> u32 hi, lo;
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index b355cf485671..7edf15643146 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -31,7 +31,7 @@ obj-y += cacheinfo.o
> obj-y += patch.o
> obj-$(CONFIG_MMU) += vdso.o vdso/
>
> -obj-$(CONFIG_RISCV_M_MODE) += clint.o traps_misaligned.o
> +obj-$(CONFIG_RISCV_M_MODE) += traps_misaligned.o
> obj-$(CONFIG_FPU) += fpu.o
> obj-$(CONFIG_SMP) += smpboot.o
> obj-$(CONFIG_SMP) += smp.o
> diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
> deleted file mode 100644
> index a9845ee023e2..000000000000
> --- a/arch/riscv/kernel/clint.c
> +++ /dev/null
> @@ -1,63 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Copyright (c) 2019 Christoph Hellwig.
> - */
> -
> -#include <linux/io.h>
> -#include <linux/of_address.h>
> -#include <linux/smp.h>
> -#include <linux/types.h>
> -#include <asm/clint.h>
> -#include <asm/csr.h>
> -#include <asm/timex.h>
> -
> -/*
> - * This is the layout used by the SiFive clint, which is also shared by the qemu
> - * virt platform, and the Kendryte KD210 at least.
> - */
> -#define CLINT_IPI_OFF 0
> -#define CLINT_TIME_CMP_OFF 0x4000
> -#define CLINT_TIME_VAL_OFF 0xbff8
> -
> -u32 __iomem *clint_ipi_base;
> -
> -static void clint_send_ipi(const struct cpumask *target)
> -{
> - unsigned int cpu;
> -
> - for_each_cpu(cpu, target)
> - writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
> -}
> -
> -static void clint_clear_ipi(void)
> -{
> - writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
> -}
> -
> -static struct riscv_ipi_ops clint_ipi_ops = {
> - .ipi_inject = clint_send_ipi,
> - .ipi_clear = clint_clear_ipi,
> -};
> -
> -void clint_init_boot_cpu(void)
> -{
> - struct device_node *np;
> - void __iomem *base;
> -
> - np = of_find_compatible_node(NULL, NULL, "riscv,clint0");
> - if (!np) {
> - panic("clint not found");
> - return;
> - }
> -
> - base = of_iomap(np, 0);
> - if (!base)
> - panic("could not map CLINT");
> -
> - clint_ipi_base = base + CLINT_IPI_OFF;
> - riscv_time_cmp = base + CLINT_TIME_CMP_OFF;
> - riscv_time_val = base + CLINT_TIME_VAL_OFF;
> -
> - clint_clear_ipi();
> - riscv_set_ipi_ops(&clint_ipi_ops);
> -}
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index f04373be54a6..2c6dd329312b 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -18,7 +18,6 @@
> #include <linux/swiotlb.h>
> #include <linux/smp.h>
>
> -#include <asm/clint.h>
> #include <asm/cpu_ops.h>
> #include <asm/setup.h>
> #include <asm/sections.h>
> @@ -79,7 +78,6 @@ void __init setup_arch(char **cmdline_p)
> #else
> unflatten_device_tree();
> #endif
> - clint_init_boot_cpu();
>
> #ifdef CONFIG_SWIOTLB
> swiotlb_init(1);
> diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
> index 8b85683ce203..07626be78c23 100644
> --- a/arch/riscv/kernel/smp.c
> +++ b/arch/riscv/kernel/smp.c
> @@ -17,7 +17,6 @@
> #include <linux/seq_file.h>
> #include <linux/delay.h>
>
> -#include <asm/clint.h>
> #include <asm/sbi.h>
> #include <asm/tlbflush.h>
> #include <asm/cacheflush.h>
> diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
> index 5fe849791bf0..a6cfa9842d4b 100644
> --- a/arch/riscv/kernel/smpboot.c
> +++ b/arch/riscv/kernel/smpboot.c
> @@ -24,7 +24,6 @@
> #include <linux/of.h>
> #include <linux/sched/task_stack.h>
> #include <linux/sched/mm.h>
> -#include <asm/clint.h>
> #include <asm/cpu_ops.h>
> #include <asm/irq.h>
> #include <asm/mmu_context.h>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 41f1c147c178..b24449da3022 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -648,9 +648,8 @@ config ATCPIT100_TIMER
> This option enables support for the Andestech ATCPIT100 timers.
>
> config RISCV_TIMER
> - bool "Timer for the RISC-V platform"
> + bool "Timer for the RISC-V platform" if COMPILE_TEST
> depends on GENERIC_SCHED_CLOCK && RISCV
> - default y
> select TIMER_PROBE
> select TIMER_OF
> help
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index 9de1dabfb126..c51c5ed15aa7 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -19,26 +19,13 @@
> #include <linux/of_irq.h>
> #include <asm/smp.h>
> #include <asm/sbi.h>
> -
> -u64 __iomem *riscv_time_cmp;
> -u64 __iomem *riscv_time_val;
> -
> -static inline void mmio_set_timer(u64 val)
> -{
> - void __iomem *r;
> -
> - r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id());
> - writeq_relaxed(val, r);
> -}
> +#include <asm/timex.h>
>
> static int riscv_clock_next_event(unsigned long delta,
> struct clock_event_device *ce)
> {
> csr_set(CSR_IE, IE_TIE);
> - if (IS_ENABLED(CONFIG_RISCV_SBI))
> - sbi_set_timer(get_cycles64() + delta);
> - else
> - mmio_set_timer(get_cycles64() + delta);
> + sbi_set_timer(get_cycles64() + delta);
> return 0;
> }
Reviewed-by: Palmer Dabbelt <palmerdabbelt at google.com>
More information about the linux-riscv
mailing list