[PATCH 2/2] RISC-V: Add support for SECCOMP

Palmer Dabbelt palmer at sifive.com
Fri Oct 26 23:07:11 PDT 2018


On Thu, 25 Oct 2018 11:31:30 PDT (-0700), david.abdurachmanov at gmail.com wrote:
> On Wed, Oct 24, 2018 at 10:40 PM Palmer Dabbelt <palmer at sifive.com> wrote:
>>
>> From: "Wesley W. Terpstra" <wesley at sifive.com>
>>
>> This is a fairly straight-forward implementation of seccomp for RISC-V
>> systems.
>>
>> Signed-off-by: Wesley W. Terpstra <wesley at sifive.com>
>> Signed-off-by: Palmer Dabbelt <palmer at sifive.com>
>> ---
>>  arch/riscv/Kconfig                   | 18 ++++++++++++++++++
>>  arch/riscv/include/asm/seccomp.h     | 10 ++++++++++
>>  arch/riscv/include/asm/syscall.h     |  6 ++++++
>>  arch/riscv/include/asm/thread_info.h |  1 +
>>  include/uapi/linux/audit.h           |  1 +
>>  5 files changed, 36 insertions(+)
>>  create mode 100644 arch/riscv/include/asm/seccomp.h
>>
>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>> index a344980287a5..28abe47602a1 100644
>> --- a/arch/riscv/Kconfig
>> +++ b/arch/riscv/Kconfig
>> @@ -28,6 +28,7 @@ config RISCV
>>         select GENERIC_STRNLEN_USER
>>         select GENERIC_SMP_IDLE_THREAD
>>         select GENERIC_ATOMIC64 if !64BIT || !RISCV_ISA_A
>> +       select HAVE_ARCH_SECCOMP_FILTER
>>         select HAVE_MEMBLOCK
>>         select HAVE_MEMBLOCK_NODE_MAP
>>         select HAVE_DMA_CONTIGUOUS
>> @@ -214,6 +215,22 @@ menu "Kernel type"
>>
>>  source "kernel/Kconfig.hz"
>>
>> +config SECCOMP
>> +       bool "Enable seccomp to safely compute untrusted bytecode"
>> +
>> +       help
>> +         This kernel feature is useful for number crunching applications
>> +         that may need to compute untrusted bytecode during their
>> +         execution. By using pipes or other transports made available to
>> +         the process as file descriptors supporting the read/write
>> +         syscalls, it's possible to isolate those applications in
>> +         their own address space using seccomp. Once seccomp is
>> +         enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
>> +         and the task is only allowed to execute a few safe syscalls
>> +         defined by each seccomp mode.
>> +
>> +         If unsure, say Y. Only embedded should say N here.
>> +
>>  endmenu
>>
>>  menu "Bus support"
>> @@ -243,3 +260,4 @@ menu "Power management options"
>>  source kernel/power/Kconfig
>>
>>  endmenu
>> +
>> diff --git a/arch/riscv/include/asm/seccomp.h b/arch/riscv/include/asm/seccomp.h
>> new file mode 100644
>> index 000000000000..c1b4407f1038
>> --- /dev/null
>> +++ b/arch/riscv/include/asm/seccomp.h
>> @@ -0,0 +1,10 @@
>> +/* Copyright 2018 SiFive, Inc. */
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef _ASM_RISCV_SECCOMP_H
>> +#define _ASM_RISCV_SECCOMP_H
>> +
>> +#include <asm/unistd.h>
>> +
>> +#include <asm-generic/seccomp.h>
>> +
>> +#endif /* _ASM_RISCV_SECCOMP_H */
>> diff --git a/arch/riscv/include/asm/syscall.h b/arch/riscv/include/asm/syscall.h
>> index 8d25f8904c00..d24f774f39df 100644
>> --- a/arch/riscv/include/asm/syscall.h
>> +++ b/arch/riscv/include/asm/syscall.h
>> @@ -19,6 +19,7 @@
>>  #define _ASM_RISCV_SYSCALL_H
>>
>>  #include <linux/sched.h>
>> +#include <uapi/linux/audit.h>
>>  #include <linux/err.h>
>>
>>  /* The array of function pointers for syscalls. */
>> @@ -99,4 +100,9 @@ static inline void syscall_set_arguments(struct task_struct *task,
>>         memcpy(&regs->a1 + i * sizeof(regs->a1), args, n * sizeof(regs->a0));
>>  }
>>
>> +static inline int syscall_get_arch(void)
>> +{
>> +       return AUDIT_ARCH_RISCV;
>> +}
>> +
>>  #endif /* _ASM_RISCV_SYSCALL_H */
>> diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h
>> index f8fa1cd2dad9..374973dc05c6 100644
>> --- a/arch/riscv/include/asm/thread_info.h
>> +++ b/arch/riscv/include/asm/thread_info.h
>> @@ -80,6 +80,7 @@ struct thread_info {
>>  #define TIF_RESTORE_SIGMASK    4       /* restore signal mask in do_signal() */
>>  #define TIF_MEMDIE             5       /* is terminating due to OOM killer */
>>  #define TIF_SYSCALL_TRACEPOINT  6       /* syscall tracepoint instrumentation */
>> +#define TIF_SECCOMP            7       /* seccomp syscall filtering active */
>>
>>  #define _TIF_SYSCALL_TRACE     (1 << TIF_SYSCALL_TRACE)
>>  #define _TIF_NOTIFY_RESUME     (1 << TIF_NOTIFY_RESUME)
>> diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
>> index 818ae690ab79..c16fa1a76659 100644
>> --- a/include/uapi/linux/audit.h
>> +++ b/include/uapi/linux/audit.h
>> @@ -399,6 +399,7 @@ enum {
>>  /* do not define AUDIT_ARCH_PPCLE since it is not supported by audit */
>>  #define AUDIT_ARCH_PPC64       (EM_PPC64|__AUDIT_ARCH_64BIT)
>>  #define AUDIT_ARCH_PPC64LE     (EM_PPC64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>> +#define AUDIT_ARCH_RISCV       (EM_RISCV)
>>  #define AUDIT_ARCH_S390                (EM_S390)
>>  #define AUDIT_ARCH_S390X       (EM_S390|__AUDIT_ARCH_64BIT)
>>  #define AUDIT_ARCH_SH          (EM_SH)
>
> Palmer,
>
> Half of the patch seems to touch audit parts. I started working on audit
> support this morning, and I can boot Fedora with audit traces.
>
> [root at fedora-riscv ~]# dmesg | grep audit
> [    0.312000] audit: initializing netlink subsys (disabled)
> [    0.316000] audit: type=2000 audit(0.316:1): state=initialized
> audit_enabled=0 res=1
> [    7.288000] audit: type=1130 audit(1529665913.772:2): pid=1 uid=0
> auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs
> comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
> terminal=? res=success'
> [    7.684000] audit: type=1130 audit(1529665914.176:3): pid=1 uid=0
> auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd"
> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
> res=success'
> [..]
>
> I am still working on audit user-space support for better testing.
>
> I suggest we first implement audit and then seccomp.

Works for me.  I'll drop my patch set for now.

Thanks!



More information about the linux-riscv mailing list