[PATCH 1/2] perf: riscv: preliminary RISC-V support

[Palmer Dabbelt]

On Mon, 09 Apr 2018 00:07:11 PDT (-0700), alankao at andestech.com wrote:
> On Thu, Apr 05, 2018 at 09:47:50AM -0700, Palmer Dabbelt wrote:
>> On Mon, 26 Mar 2018 00:57:54 PDT (-0700), alankao at andestech.com wrote:
>> >This patch provide a basic PMU, riscv_base_pmu, which supports two
>> >general hardware event, instructions and cycles.  Furthermore, this
>> >PMU serves as a reference implementation to ease the portings in
>> >the future.
>> >
>> >riscv_base_pmu should be able to run on any RISC-V machine that
>> >conforms to the Priv-Spec.  Note that the latest qemu model hasn't
>> >fully support a proper behavior of Priv-Spec 1.10 yet, but work
>> >around should be easy with very small fixes.  Please check
>> >https://github.com/riscv/riscv-qemu/pull/115 for future updates.
>> >
>> >Cc: Nick Hu <nickhu at andestech.com>
>> >Cc: Greentime Hu <greentime at andestech.com>
>> >Signed-off-by: Alan Kao <alankao at andestech.com>
>>
>> We should really be able to detect PMU types at runtime (via a device tree
>> entry) rather than requiring that a single PMU is built in to the kernel.
>> This will require a handful of modifications to how this patch works, which
>> I'll try to list below.
>
>> >+menu "PMU type"
>> >+	depends on PERF_EVENTS
>> >+
>> >+config RISCV_BASE_PMU
>> >+	bool "Base Performance Monitoring Unit"
>> >+	def_bool y
>> >+	help
>> >+	  A base PMU that serves as a reference implementation and has limited
>> >+	  feature of perf.
>> >+
>> >+endmenu
>> >+
>>
>> Rather than a menu where a single PMU can be selected, there should be
>> options to enable or disable support for each PMU type -- this is just like
>> how all our other drivers work.
>>
>
> I see.  Sure.  The descriptions and implementation will be refined in v3.
>
>> >+struct pmu * __weak __init riscv_init_platform_pmu(void)
>> >+{
>> >+	riscv_pmu = &riscv_base_pmu;
>> >+	return riscv_pmu->pmu;
>> >+}
>>
>> Rather than relying on a weak symbol that gets overridden by other PMU
>> types, this should look through the device tree for a compatible PMU (in the
>> case of just the base PMU it could be any RISC-V hart) and install a PMU
>> handler for it.  There'd probably be some sort of priority scheme here, like
>> there are for other driver subsystems, where we'd pick the best PMU driver
>> that's compatible with the PMUs on every hart.
>>
>> >+
>> >+int __init init_hw_perf_events(void)
>> >+{
>> >+	struct pmu *pmu = riscv_init_platform_pmu();
>> >+
>> >+	perf_irq = NULL;
>> >+	perf_pmu_register(pmu, "cpu", PERF_TYPE_RAW);
>> >+	return 0;
>> >+}
>> >+arch_initcall(init_hw_perf_events);
>>
>> Since we only have a single PMU type right now this isn't critical to handle
>> right away, but we will have to refactor this before adding another PMU.
>
> I see.  My rough plan is to do the device tree parsing here, and if no specific
> PMU string is found then just register the base PMU proposed in this patch.
> How about this idea?

Sounds good.  We know the generic PMU will work on all RISC-V harts, so there's 
no need to add an explicit device tree entry for it.  Then we can figure out 
how to add device tree entries for custom performance monitors later :)