[PATCH v17 11/11] arm64: dts: qcom: kaanapali: Add camera MCLK pinctrl

[Hangxiang Ma]

On 9/29/2026 2:07 PM, sashiko-bot at kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> - [Low] dts: devicetree node names incorrectly use underscores
> --
> 
> commit 185a6cf958fbea99362a9e2c9f3989dad4362d3c
> Author: Hangxiang Ma <hangxiang.ma at oss.qualcomm.com>
> 
> arm64: dts: qcom: kaanapali: Add camera MCLK pinctrl
> 
> This commit adds TLMM pinctrl states for the camera master clock GPIOs on
> Kaanapali so camera sensor nodes can select the proper MCLK pin functions
> when enabled.
> 
>> diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
>> index c19945bc438eb..bbcd5a622f0b2 100644
>> --- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
> [ ... ]
>> +			cam_mclk2_default: cam-mclk2-default-state {
>> +				pins = "gpio91";
>> +				function = "cam_asc_mclk2";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			cam_mclk3_default: cam_mclk3-default-state {
> 
> [Severity: Low]
> Does this node name incorrectly use an underscore instead of a hyphen?
> 
> Devicetree node names conventionally use hyphens rather than underscores.
> The previous nodes like cam-mclk0-default-state use the correct hyphenated
> pattern.
> 
> Using an underscore here and in the subsequent cam_mclk4 through cam_mclk7
> nodes will trigger dtc style warnings (node_name_chars_strict) and fail
> standard devicetree style checks.
> 
>> +				pins = "gpio92";
>> +				function = "cam_mclk";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
> [ ... ]
> 
Yes. I change original names to align with Glymur style but makes this 
mistake. Will fix it in next revision.

Best Regards,
Hangxiang