[PATCH] arm64: dts: qcom: Shikra SD Card support

[Bjorn Andersson]

On Fri, Sep 11, 2026 at 03:09:30PM +0530, Monish Chunara wrote:
> This is v5 of the Shikra SD Card support series.
> 
> This series adds SD card support for the Shikra platform.
> 
> The first patch adds the SDHC2 controller node and the necessary pinctrl
> configurations to the base Shikra SoC dtsi. The second patch enables
> this support on the Shikra EVK (CQS, CQM, and IQS variants) by defining
> the regulator supplies and the card detection GPIO.
> 
> Signed-off-by: Monish Chunara <monish.chunara at oss.qualcomm.com>

I don't understand how you managed to send patch 1 alone and then 2 and
3 in a series...

Please stop doing your own thing and adopt b4!


I'll put these 3 patches in the recyle bin for now, please rebase,
retest and resubmit.

Regards,
Bjorn

> 
> Changes in v5:
> - Rebased on top of latest linux-next
> - Fix interrupts-cells to 4 for sdhc_2 (sashiko-bot)
> - Moved gpio include directive into shikra-evk.dtsi (sashiko-bot)
> - Link to v4: https://lore.kernel.org/all/20260804122054.3462145-1-monish.chunara@oss.qualcomm.com/
> 
> Changes in v4:
> - Rebase on latest code base
> - Collect Reviewed-by tags (Konrad)
> - Drop the dependency link - since all base changes are merged
> - Link to v3: https://lore.kernel.org/all/20260702073354.3641966-1-monish.chunara@oss.qualcomm.com/
> 
> Changes in v3:
> - Padded the address part of the reg property in the sdhc_2 node to
>   8 hex digits with leading zeroes for consistency with other nodes
>   in the file
> - Moved the common sdhc_2 properties to shikra-evk DT file
> - Link to v2: https://lore.kernel.org/all/20260630165700.1886608-1-monish.chunara@oss.qualcomm.com
> 
> Changes in v2:
> - Rectify the alignment for clocks and interconnect properties for SD
>   card
> - Link to v1: https://lore.kernel.org/all/20260604122045.494712-1-monish.chunara@oss.qualcomm.com
> 
> Testing:
> - Validated on Shikra EVK variants.
> 
> Monish Chunara (2):
>   arm64: dts: qcom: Add SD Card support for Shikra SoC
>   arm64: dts: qcom: Enable SD card for Shikra EVK
> 
>  arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts |  9 ++
>  arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts |  9 ++
>  arch/arm64/boot/dts/qcom/shikra-evk.dtsi    | 11 +++
>  arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts |  9 ++
>  arch/arm64/boot/dts/qcom/shikra.dtsi        | 97 +++++++++++++++++++++
>  5 files changed, 135 insertions(+)
> 
> --
> 2.34.1
> 
> --- b4-submit-tracking ---
> {
>   "series": {
>     "revision": 5,
>     "change-id": "20260911-shikra-sd-card-61d428639de0",
>     "prefixes": [],
>     "from-thread": "20260804122054.3462145-1-monish.chunara at oss.qualcomm.com"
>   }
> }
> -- 
> 2.34.1
>