[PATCH 3/6] phy: qcom: qmp-pcie: Add endpoint PHY configuration for QCS8300

[Konrad Dybcio]

On 9/21/26 12:58 PM, Krishna Chaitanya Chundru wrote:
> Monaco supports PCIe Endpoint mode on both PCIe controllers. Reuse
> the existing SA8775P Endpoint PHY programming for the 16 GT/s x2 PHY and
> add a new 16 GT/s x4 Endpoint PHY configuration with the required RX
> tuning parameters.
> 
> This allows both Monaco PCIe controllers to operate reliably in
> Endpoint mode.

Does that also apply to lemans?

Konrad