[PATCH v2 4/5] arm64: dts: qcom: glymur-qcb: Enable UFS

[Pradeep P V K]

Enable UFS for glymur-qcb board.

Reviewed-by: Abel Vesa <abel.vesa at oss.qualcomm.com>
Signed-off-by: Pradeep P V K <pradeep.pragallapati at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur-qcb.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur-qcb.dts b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
index 17d8ff3aed23..f17181bfeadb 100644
--- a/arch/arm64/boot/dts/qcom/glymur-qcb.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
@@ -697,3 +697,21 @@ bluetooth {
 		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
 	};
 };
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 250 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_e0_2p4>;
+	vcc-max-microamp = <1200000>;
+	vccq-supply = <&vreg_l12b_e0_1p14>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
+	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+
+	status = "okay";
+};

-- 
2.34.1