[PATCH 3/5] arm64: dts: qcom: glymur: Add UFS nodes

[Pradeep Pragallapati]

On 9/14/2026 7:36 PM, Abel Vesa wrote:
> On 26-09-11 22:17:07, Pradeep P V K wrote:
>> Add UFS PHY and UFS host controller nodes for Glymur SoC.
>>
>> Signed-off-by: Pradeep P V K <pradeep.pragallapati at oss.qualcomm.com>
> 
> One nit below.
> 
> With Konrad's comments addressed, I think it looks good, so:
> 
> Reviewed-by: Abel Vesa <abel.vesa at oss.qualcomm.com>
> 
>> ---
>>   arch/arm64/boot/dts/qcom/glymur.dtsi | 114 ++++++++++++++++++++++++++++++++++-
>>   1 file changed, 111 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
>> index 624a9edd602c..7bbc804ed340 100644
>> --- a/arch/arm64/boot/dts/qcom/glymur.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
>> @@ -812,9 +812,9 @@ gcc: clock-controller at 100000 {
>>   				 <0>,				/* QUSB4 1 PHY RX 1 */
>>   				 <0>,				/* QUSB4 2 PHY RX 0 */
>>   				 <0>,				/* QUSB4 2 PHY RX 1 */
>> -				 <0>,				/* UFS PHY RX Symbol 0 */
>> -				 <0>,				/* UFS PHY RX Symbol 1 */
>> -				 <0>,				/* UFS PHY TX Symbol 0 */
>> +				 <&ufs_mem_phy 0>,		/* UFS PHY RX Symbol 0 */
>> +				 <&ufs_mem_phy 1>,		/* UFS PHY RX Symbol 1 */
>> +				 <&ufs_mem_phy 2>,		/* UFS PHY TX Symbol 0 */
>>   				 <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
>>   				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
>>   				 <&usb_2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
>> @@ -4103,6 +4103,114 @@ rng: rng at 10c3000 {
>>   			reg = <0x0 0x010c3000 0x0 0x1000>;
>>   		};
>>   
>> +		ufs_mem_phy: phy at 1d80000 {
>> +			compatible = "qcom,glymur-qmp-ufs-phy";
>> +			reg = <0x0 0x01d80000 0x0 0x2000>;
>> +
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
>> +				 /* UFS and PCIE4 shares the same clkref on glymur */
> 
> On top of Konrad's comment, I'd drop the "on glymur" part entirely here.
sure, i will remove it in my next patchset.