[PATCH v4 17/20] phy: rockchip: inno-hdmi: Use the common Innosilicon PHY helpers

[sashiko-bot at kernel.org]

> The RK3328 pre-PLL programming, its table lookup and its recalc_rate and
> determine_rate implementations are the generic Innosilicon ones, so drop
> the local copies and use the shared helpers instead.
> 
> The RK3228 pre-PLL sits at different register addresses, so it keeps its
> own register level code and only shares the table lookup.
> 
> The now unused RK3328 pre-PLL register macros go with it, as does the
> local pre-PLL config lookup wrapper; both call sites already have the
> TMDS clock to hand and call inno_hdmi_phy_pre_pll_lookup() directly.
> 
> The RK3328 recalc_rate used to log the pre-PLL output as "vco". The
> shared helper logs it too, and reports the actual VCO frequency
> alongside the rate, which is the value with the 1.4-3.2 GHz constraint.
> 
> The register writes, their order and the values written are unchanged.
> No functional change intended.
> 
> Signed-off-by: Michal Wilczynski <m.wilczynski at samsung.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260915-jh7110-clean-send-v4-0-f0e4fd6f2cc8@samsung.com?part=17