[PATCH 4/5] arm64: dts: qcom: glymur-qcb: Enable UFS

[Konrad Dybcio]

On 9/11/26 6:47 PM, Pradeep P V K wrote:
> Enable UFS for glymur-qcb board.
> 
> Signed-off-by: Pradeep P V K <pradeep.pragallapati at oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/glymur-qcb.dts | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/glymur-qcb.dts b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
> index 17d8ff3aed23..b6e384024dff 100644
> --- a/arch/arm64/boot/dts/qcom/glymur-qcb.dts
> +++ b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
> @@ -697,3 +697,21 @@ bluetooth {
>  		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
>  	};
>  };
> +
> +&ufs_mem_phy {
> +	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
> +	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
> +
> +	status = "okay";
> +};
> +
> +&ufs_mem_hc {

Please keep the label references sorted alphabetically

Konrad

> +	reset-gpios = <&tlmm 250 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l17b_e0_2p4>;
> +	vcc-max-microamp = <1200000>;
> +	vccq-supply = <&vreg_l12b_e0_1p14>;
> +	vccq-max-microamp = <1200000>;
> +
> +	status = "okay";
> +};
>