[PATCH 07/17] phy: qcom: edp: Add Nord-specific register offsets

[Dmitry Baryshkov]

On Fri, Sep 11, 2026 at 09:06:38PM +0530, Nabige Aala wrote:
> From: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
> 
> Nord relocates several DP PHY and QSERDES v8 COM registers relative
> to existing SoCs.  Add Nord-specific defines for the relocated and
> new-only registers in phy-qcom-qmp-qserdes-dp-com-v8.h and
> phy-qcom-edp.c so Nord sequences can reference them by name.

If the registers are reallocated it usually means that there are other
registers being inserted (or deleted). Are those the only registers
being changed?

> 
> Signed-off-by: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
> Signed-off-by: Nabige Aala <nabige.aala at oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-edp.c                   | 10 ++++++++++
>  drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h |  3 +++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index a3c893f72908..bf8a17336c7e 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -41,9 +41,19 @@
>  
>  #define DP_PHY_VCO_DIV                          0x0074
>  #define DP_PHY_TX0_TX1_LANE_CTL                 0x007c
> +/* Nord uses a different register layout; non-Nord value is 0x00a0 */
>  #define DP_PHY_TX2_TX3_LANE_CTL                 0x00a0
> +#define DP_PHY_TX2_TX3_LANE_CTL_NORD            0x00c0
>  
> +/* Nord uses a different register layout; non-Nord value is 0x00e0 */
>  #define DP_PHY_STATUS                           0x00e0
> +#define DP_PHY_STATUS_NORD                      0x0110
> +#define DP_PHY_LDO_CFG                          0x00f0

Why does it not have a _NORD suffix?

> +
> +/* Nord-specific TX lane registers */
> +#define DP_PHY_TX_LN0_DRV_LVL_NORD             0x00e4
> +#define DP_PHY_TX_LN1_DRV_LVL_NORD             0x00e8
> +#define TXn_TX_BAND_NORD                        0x0024
>  
>  /* LANE_TXn registers */
>  #define TXn_CLKBUF_ENABLE                       0x0000
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
> index 93edabb830af..008b17222a8d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
> @@ -48,5 +48,8 @@
>  #define DP_QSERDES_V8_COM_CLK_FWD_CONFIG_1		0x2f4
>  #define DP_QSERDES_V8_COM_CMN_STATUS			0x314
>  #define DP_QSERDES_V8_COM_C_READY_STATUS		0x33c
> +#define DP_QSERDES_V8_COM_SVS_MODE_CLK_SEL_NORD		0x17c
> +#define DP_QSERDES_V8_COM_CMN_STATUS_NORD		0x1d0
> +#define DP_QSERDES_V8_COM_C_READY_STATUS_NORD		0x1f8
>  
>  #endif
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry