[PATCH 1/2] phy: qcom: qmp-combo: do not decrement init_count on a forced init failure

[Oleg Keri]

qmp_combo_com_init() only takes a reference when it is not forced:

	if (!force && qmp->init_count++)
		return 0;

With force set, && short-circuits on !force and init_count++ is never
evaluated.  The error path decrements unconditionally, so a forced init
that fails drops a reference it never took and init_count goes negative.

init_count is a plain int, so the damage persists for the rest of the
boot.  qmp_combo_com_exit() then sees a non-zero value in

	if (!force && --qmp->init_count)
		return 0;

and returns early every time, so the clocks, resets and regulators are
never released; the runtime PM callbacks only bail on exactly zero, so
they keep touching hardware that may already be off.

Both callers that pass force are the typec_switch and typec_mux
callbacks, which tear the common block down and bring it back up on an
orientation or altmode change.

Only decrement the count when it was actually taken.

Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching")
Signed-off-by: Oleg Keri <okerixx at gmail.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bf4d29fe1719..7d740ed0ce16 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -4253,7 +4253,8 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
 err_disable_regulators:
 	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
 err_decrement_count:
-	qmp->init_count--;
+	if (!force)
+		qmp->init_count--;
 
 	return ret;
 }
-- 
2.55.0