[PATCH v4 6/9] phy: qualcomm: qmp-combo: Extract common DP PHY init sequence

[Nabige Aala]

From: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>

Extract the common DP PHY initialization sequence shared between
qmp_v456_configure_dp_phy() and qmp_v8_configure_dp_phy() into a new
qmp_combo_configure_dp_phy_common() function.

The common sequence covers:
- Validation that dp_aux_cfg2 is configured for the platform
- Writing dp_phy_cfg1 and dp_aux_cfg2 hardware-specific register values
- Calling configure_dp_mode() for TypeC lane orientation
- Programming AUX_CFG1, TX lane control registers
- Invoking configure_dp_clocks() callback
- PHY_CFG reset/enable sequence
- Polling COM_C_READY_STATUS and COM_CMN_STATUS for PLL lock

Refactor qmp_v456_configure_dp_phy() to call the common function,
removing the duplicated initialization code. Update
qmp_v8_configure_dp_phy() to call qmp_combo_configure_dp_phy_common()
directly instead of going through qmp_v456_configure_dp_phy().

Signed-off-by: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
Signed-off-by: Mahadevan P <mahadevan.p at oss.qualcomm.com>
Signed-off-by: Nabige Aala <nabige.aala at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 99 ++++++++++++++++++-------------
 1 file changed, 59 insertions(+), 40 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 0ec382aebe2b..79006469f3d4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -3459,6 +3459,7 @@ static const struct qmp_phy_cfg glymur_usb3dpphy_cfg = {
 	.configure_dp_tx	= qmp_v4_configure_dp_tx,
 	.configure_dp_clocks	= qmp_v8_configure_dp_clocks,
 	.configure_dp_phy	= qmp_v8_configure_dp_phy,
+
 	.dp_aux_cfg2		= QSERDES_DP_PHY_AUX_CFG2_V8,
 	.dp_phy_cfg1		= QSERDES_DP_PHY_CFG1_V8,
 	.dp_mode_ignore_reverse	= true,
@@ -3766,6 +3767,62 @@ static void qmp_v4_dp_aux_init(struct qmp_combo *qmp)
 	       qmp->dp_dp_phy + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
 }
 
+static int qmp_combo_configure_dp_phy_common(struct qmp_combo *qmp)
+{
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	u32 status;
+	int ret;
+
+	if (!cfg->dp_aux_cfg2) {
+		dev_err(qmp->dev, "DP AUX CFG2 value not configured\n");
+		return -EINVAL;
+	}
+
+	writel(cfg->dp_phy_cfg1, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG_1);
+
+	qmp_combo_configure_dp_mode(qmp);
+
+	writel(0x13, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG1);
+	writel(cfg->dp_aux_cfg2, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG2);
+
+	writel(0x05, qmp->dp_dp_phy + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+	writel(0x05, qmp->dp_dp_phy + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+
+	ret = qmp->cfg->configure_dp_clocks(qmp);
+	if (ret)
+		return ret;
+
+	writel(0x01, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
+	writel(0x05, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
+	writel(0x01, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
+	writel(0x09, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
+
+	writel(0x20, qmp->dp_serdes + cfg->regs[QPHY_COM_RESETSM_CNTRL]);
+
+	if (readl_poll_timeout(qmp->dp_serdes + cfg->regs[QPHY_COM_C_READY_STATUS],
+			status,
+			((status & BIT(0)) > 0),
+			500,
+			10000))
+		return -ETIMEDOUT;
+
+	if (readl_poll_timeout(qmp->dp_serdes + cfg->regs[QPHY_COM_CMN_STATUS],
+			status,
+			((status & BIT(0)) > 0),
+			500,
+			10000))
+		return -ETIMEDOUT;
+
+	if (readl_poll_timeout(qmp->dp_serdes + cfg->regs[QPHY_COM_CMN_STATUS],
+			status,
+			((status & BIT(1)) > 0),
+			500,
+			10000))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
 static void qmp_v8_dp_aux_init(struct qmp_combo *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -3866,48 +3923,10 @@ static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp)
 	u32 status;
 	int ret;
 
-	writel(0x0f, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG_1);
-
-	qmp_combo_configure_dp_mode(qmp);
-
-	writel(0x13, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG1);
-	writel(0xa4, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG2);
-
-	writel(0x05, qmp->dp_dp_phy + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
-	writel(0x05, qmp->dp_dp_phy + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
-
-	ret = qmp->cfg->configure_dp_clocks(qmp);
+	ret = qmp_combo_configure_dp_phy_common(qmp);
 	if (ret)
 		return ret;
 
-	writel(0x01, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-	writel(0x05, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-	writel(0x01, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-	writel(0x09, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
-
-	writel(0x20, qmp->dp_serdes + cfg->regs[QPHY_COM_RESETSM_CNTRL]);
-
-	if (readl_poll_timeout(qmp->dp_serdes + cfg->regs[QPHY_COM_C_READY_STATUS],
-			status,
-			((status & BIT(0)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	if (readl_poll_timeout(qmp->dp_serdes + cfg->regs[QPHY_COM_CMN_STATUS],
-			status,
-			((status & BIT(0)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	if (readl_poll_timeout(qmp->dp_serdes + cfg->regs[QPHY_COM_CMN_STATUS],
-			status,
-			((status & BIT(1)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
 	writel(0x19, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
 
 	if (readl_poll_timeout(qmp->dp_dp_phy + cfg->regs[QPHY_DP_PHY_STATUS],
@@ -3999,7 +4018,7 @@ static int qmp_v8_configure_dp_phy(struct qmp_combo *qmp)
 	u32 status;
 	int ret;
 
-	ret = qmp_v456_configure_dp_phy(qmp);
+	ret = qmp_combo_configure_dp_phy_common(qmp);
 	if (ret < 0)
 		return ret;
 

-- 
2.34.1