[PATCH v2 07/13] phy: qcom: edp: Add Nord-specific register offsets

[Nabige Aala]

On 10/13/2026 3:49 PM, Dmitry Baryshkov wrote:
> On Mon, Oct 12, 2026 at 07:02:17PM +0530, Nabige Aala wrote:
>> From: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
>>
>> Nord relocates several DP PHY and QSERDES v8 COM registers relative
>> to existing SoCs.
> Why?
>
>> Add Nord-specific defines for the relocated and
>> new-only registers in phy-qcom-qmp-qserdes-dp-com-v8.h and
>> phy-qcom-edp.c so Nord sequences can reference them by name.
> Typically we don't do it, If something differs, it should get its own
> set of headers, describing all necessary offsets (especially for the
> QSERDES). Otherwise it's not obvious if other regs (without the _NORD
> counterpart) are valid or not.

Ack,

Are you suggesting that we introduce a new header file for QSERDES?
If so, we're currently using the v8 header. What naming convention 
should we follow for the new header file?

>
>> Assisted-by: LLM
>> Signed-off-by: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
>> Signed-off-by: Nabige Aala <nabige.aala at oss.qualcomm.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-edp.c                   | 7 +++++++
>>   drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h | 3 +++
>>   2 files changed, 10 insertions(+)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
>> index a3c893f72908..d5c6835b6c70 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
>> @@ -42,8 +42,15 @@
>>   #define DP_PHY_VCO_DIV                          0x0074
>>   #define DP_PHY_TX0_TX1_LANE_CTL                 0x007c
>>   #define DP_PHY_TX2_TX3_LANE_CTL                 0x00a0
>> +#define DP_PHY_TX2_TX3_LANE_CTL_NORD            0x00c0
>>   
>>   #define DP_PHY_STATUS                           0x00e0
>> +#define DP_PHY_STATUS_NORD                      0x0110
>> +#define DP_PHY_LDO_CFG_NORD                     0x00f0
>> +
>> +#define DP_PHY_TX_LN0_DRV_LVL_NORD             0x00e4
>> +#define DP_PHY_TX_LN1_DRV_LVL_NORD             0x00e8
>> +#define TXn_TX_BAND_NORD                        0x0024
>>   
>>   /* LANE_TXn registers */
>>   #define TXn_CLKBUF_ENABLE                       0x0000
> I'd suggest adding these together with the actual users.

Ack, I will update in the next revision.

Thanks,

Nabige

>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
>> index 93edabb830af..008b17222a8d 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
>> @@ -48,5 +48,8 @@
>>   #define DP_QSERDES_V8_COM_CLK_FWD_CONFIG_1		0x2f4
>>   #define DP_QSERDES_V8_COM_CMN_STATUS			0x314
>>   #define DP_QSERDES_V8_COM_C_READY_STATUS		0x33c
>> +#define DP_QSERDES_V8_COM_SVS_MODE_CLK_SEL_NORD		0x17c
>> +#define DP_QSERDES_V8_COM_CMN_STATUS_NORD		0x1d0
>> +#define DP_QSERDES_V8_COM_C_READY_STATUS_NORD		0x1f8
>>   
>>   #endif
>>
>> -- 
>> 2.34.1
>>