[PATCH 2/7] dt-bindings: phy: qcom: Add qcom,sa8775p-csi2-phy schema

[Krzysztof Kozlowski]

On Fri, Oct 16, 2026 at 04:54:57PM -0700, Anusha Arun Nandi wrote:
> Add a device-tree binding for the Qualcomm SA8775P MIPI CSI2
> PHY, modelled as a standalone generic-PHY provider like the existing
> qcom,x1e80100-csi2-phy, so CAMSS can consume the CSIPHY through the
> common PHY framework instead of driving it in-line.

A nit, subject: drop second/last, redundant "schema". The
"dt-bindings" prefix is already stating that these are schemas.
See also:
https://elixir.bootlin.com/linux/v7.1-rc7/source/Documentation/devicetree/bindings/submitting-patches.rst#L23

> 
> Follows the qcom,x1e80100-csi2-phy schema's shape: a ports/port at 0
> sensor-input endpoint carrying data-lanes/bus-type (D-PHY only for
> now, C-PHY bus-type value is accepted by the schema but wired up by a
> companion series), a port at 1 CSID output, and a mandatory
> operating-points-v2 table plus power-domains/power-domain-names.
> 
> Unlike x1e80100, SA8775P's CSIPHY has a single power-domain: the
> Titan Top GDSC, matching the legacy in-tree CAMSS driver's
> sa8775p_resources.pd_name = "top" (drivers/media/platform/qcom/camss/
> camss.c) and the existing lemans.dtsi camss node's power-domains =
> <&camcc CAM_CC_TITAN_TOP_GDSC>. It is not OPP-scaled, only kept
> enabled, the same way x1e80100's own "top" domain is.
> 
> The PHY takes three clocks (core, timer and the shared CSID CSIPHY RX
> clock) and the vdda-phy/vdda-pll supplies. The core/timer naming
> matches x1e80100's clock-names convention for the same pair of
> clocks.
> 
> Signed-off-by: Anusha Arun Nandi <anusha.nandi at oss.qualcomm.com>
> ---
>  .../bindings/phy/qcom,sa8775p-csi2-phy.yaml   | 172 ++++++++++++++++++
>  1 file changed, 172 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,sa8775p-csi2-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8775p-csi2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8775p-csi2-phy.yaml
> new file mode 100644
> index 000000000000..b66ec2f14189
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,sa8775p-csi2-phy.yaml
> @@ -0,0 +1,172 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2026 Qualcomm Innovation Center, Inc. All rights reserved.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,sa8775p-csi2-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SA8775P CSI2 PHY
> +
> +maintainers:
> +  - Anusha Arun Nandi <anusha.nandi at oss.qualcomm.com>
> +
> +description:
> +  Qualcomm MIPI CSI2 D-PHY. Connects MIPI CSI2 sensors to Qualcomm's Camera
> +  CSI Decoder on the SA8775P SoC.
> +
> +properties:
> +  compatible:
> +    const: qcom,sa8775p-csi2-phy
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 3
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: timer
> +      - const: csiphy_rx

You just named it basde on clock name. Instead, name it based on the
input name. csiphy is also completely redundant.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  operating-points-v2: true
> +
> +  opp-table:
> +    type: object
> +
> +  power-domains:
> +    items:
> +      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> +  power-domain-names:
> +    items:
> +      - const: top
> +
> +  vdda-phy-supply:
> +    description: Phandle to PHY supply.
> +
> +  vdda-pll-supply:
> +    description: Phandle to PLL supply.
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description:
> +          Sensor input. A single sensor is described by a single endpoint
> +          with one to four data lanes, numbered 1-4. The clock lane is
> +          position 0.
> +
> +        unevaluatedProperties: false
> +
> +        patternProperties:
> +          "^endpoint(@0)?$":

so not a pattern really and just endpoint.

> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +            properties:
> +              bus-type:
> +                enum:
> +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +                default: 4
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  minimum: 1
> +                  maximum: 4
> +                description:
> +                  Data lane positions following this endpoint's clock
> +                  lane. Positions are a per-port logical numbering, not
> +                  package pad or ball positions.
> +
> +            required:
> +              - data-lanes
> +              - remote-endpoint
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Output to the CAMSS CSID controller.
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - operating-points-v2
> +  - power-domains
> +  - power-domain-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/media/video-interfaces.h>
> +
> +    csiphy0: csiphy at ac9c000 {

Drop unused label

git grep csiphy@

Don't come with own style.

Best regards,
Krzysztof