[PATCH RFC v2 3/4] phy: qcom-mipi-csi2: Rename the D-PHY init sequence

[Bryan O'Donoghue]

On 16/10/2026 11:57, George Neacsu via B4 Relay wrote:
> From: George Neacsu <geocausa at gmail.com>
> 
> The init sequence and its size describe the D-PHY mode only. Call them
> dphy_init_seq and dphy_lane_array_size, so that a C-PHY sequence can sit
> next to them under matching names.
> 
> No functional change.
> 
> Suggested-by: Bryan O'Donoghue <bod at kernel.org>
> Assisted-by: Claude:claude-opus-5-5
> Signed-off-by: George Neacsu <geocausa at gmail.com>
> ---
>   drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c | 8 ++++----
>   drivers/phy/qualcomm/phy-qcom-mipi-csi2.h          | 4 ++--
>   2 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
> index 966d79c98..b2d4ec3e8 100644
> --- a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
> +++ b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
> @@ -246,8 +246,8 @@ phy_qcom_mipi_csi2_gen2_config_lanes(struct mipi_csi2phy_device *csi2phy,
>   				     u8 settle_cnt)
>   {
>   	const struct mipi_csi2phy_device_regs *regs = csi2phy_dev_to_regs(csi2phy);
> -	const struct mipi_csi2phy_lane_regs *r = regs->init_seq;
> -	int i, array_size = regs->lane_array_size;
> +	const struct mipi_csi2phy_lane_regs *r = regs->dphy_init_seq;
> +	int i, array_size = regs->dphy_lane_array_size;
>   	u32 val;
> 
>   	for (i = 0; i < array_size; i++, r++) {
> @@ -372,8 +372,8 @@ static struct mipi_csi2_genpd x1e_genpds[] = {
>   const struct mipi_csi2phy_soc_cfg mipi_csi2_dphy_4nm_x1e = {
>   	.ops = &phy_qcom_mipi_csi2_ops_3ph_1_0,
>   	.reg_info = {
> -		.init_seq = lane_regs_x1e80100,
> -		.lane_array_size = ARRAY_SIZE(lane_regs_x1e80100),
> +		.dphy_init_seq = lane_regs_x1e80100,
> +		.dphy_lane_array_size = ARRAY_SIZE(lane_regs_x1e80100),
>   		.common_regs_offset = 0x1000,
>   	},
>   	.supply_names = (const char **)x1e_supplies,
> diff --git a/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h b/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h
> index 7e55ae007..0d6031a4d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h
> +++ b/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h
> @@ -48,8 +48,8 @@ struct mipi_csi2phy_lane_regs {
>   };
> 
>   struct mipi_csi2phy_device_regs {
> -	const struct mipi_csi2phy_lane_regs *init_seq;
> -	const int lane_array_size;
> +	const struct mipi_csi2phy_lane_regs *dphy_init_seq;
> +	const int dphy_lane_array_size;
>   	const u32 common_regs_offset;
>   };
> 
> 
> --
> 2.53.0
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>