[PATCH RFC 4/4] media: qcom: camss: Configure C-PHY through the PHY API

[Loic Poulain]

On Fri, Oct 16, 2026 at 12:20 AM George Neacsu via B4 Relay
<devnull+geocausa.gmail.com at kernel.org> wrote:
>
> From: George Neacsu <geocausa at gmail.com>
>
> With a PHY API CSIPHY, csiphy_stream_on() always asks for D-PHY. Ask for
> C-PHY when the endpoint is C-PHY, and pass the trio count and the symbol
> rate, which by the V4L2 convention is twice the link frequency.
>
> Assisted-by: Claude:claude-opus-5-5
> Signed-off-by: George Neacsu <geocausa at gmail.com>
> ---
>  drivers/media/platform/qcom/camss/camss-csiphy.c | 35 ++++++++++++++----------
>  1 file changed, 21 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
> index f44f2aeb9..8e1b4335a 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
> @@ -329,17 +329,15 @@ static int csiphy_stream_on(struct csiphy_device *csiphy)
>         u8 bpp = csiphy_get_bpp(csiphy->res->formats->formats, csiphy->res->formats->nformats,
>                                 csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
>         struct csiphy_lanes_cfg *lncfg = &csiphy->cfg.csi2->lane_cfg;
> -       struct phy_configure_opts_mipi_dphy *dphy_cfg;
> -       union phy_configure_opts dphy_opts = { 0 };
> +       const bool cphy = lncfg->phy_cfg == V4L2_MBUS_CSI2_CPHY;
> +       union phy_configure_opts opts = { 0 };
>         struct device *dev = csiphy->camss->dev;
>         u8 num_lanes = lncfg->num_data;
>         s64 link_freq;
>         int ret;
>
> -       dphy_cfg = &dphy_opts.mipi_dphy;
> -
>         link_freq = camss_get_link_freq(&csiphy->subdev.entity, bpp, num_lanes,
> -                                       csiphy->cfg.csi2->lane_cfg.phy_cfg == V4L2_MBUS_CSI2_CPHY);
> +                                       cphy);
>
>         if (link_freq <= 0) {
>                 dev_err(dev,
> @@ -347,23 +345,32 @@ static int csiphy_stream_on(struct csiphy_device *csiphy)
>                 return -EINVAL;
>         }
>
> -       ret = phy_mipi_dphy_get_default_config_for_hsclk(link_freq, num_lanes,
> -                                                        dphy_cfg);
> -       if (ret < 0) {
> -               dev_err(dev, "Invalid config for link frequency %lld\n",
> -                       link_freq);
> -               return ret;
> +       if (cphy) {
> +               /* A C-PHY link frequency is half the symbol rate. */
> +               opts.mipi_cphy.symbol_rate = link_freq * 2;
> +               opts.mipi_cphy.lanes = num_lanes;

Wouldn't it be cleaner to use a similar helper function as the D-PHY
driver does:
Introducing a phy_mipi_cphy_get_default_config_for_hsclk

> +       } else {
> +               ret = phy_mipi_dphy_get_default_config_for_hsclk(link_freq,
> +                                                                num_lanes,
> +                                                                &opts.mipi_dphy);
> +               if (ret < 0) {
> +                       dev_err(dev, "Invalid config for link frequency %lld\n",
> +                               link_freq);
> +                       return ret;
> +               }
>         }
>
> -       ret = phy_set_mode(csiphy->phy, PHY_MODE_MIPI_DPHY);
> +       ret = phy_set_mode(csiphy->phy,
> +                          cphy ? PHY_MODE_MIPI_CPHY : PHY_MODE_MIPI_DPHY);
>         if (ret) {
>                 dev_err(dev, "Failed to set phy mode\n");
>                 return ret;
>         }
>
> -       ret = phy_configure(csiphy->phy, &dphy_opts);
> +       ret = phy_configure(csiphy->phy, &opts);
>         if (ret) {
> -               dev_err(dev, "failed to configure MIPI D-PHY\n");
> +               dev_err(dev, "failed to configure MIPI %s\n",
> +                       cphy ? "C-PHY" : "D-PHY");
>                 goto error;
>         }
>
>
> --
> 2.53.0
>
>