[PATCH v6 0/2] Add support for SA8255P in the qcom-qmp-usb phy driver

[Mattijs Korpershoek]

Hi Mani,

On Fri, Oct 02, 2026 at 11:39, Mattijs Korpershoek <mkorpershoek at kernel.org> wrote:

> The Qualcomm automotive SA8255p SoC relies on firmware to configure
> platform resources, including clocks, interconnects and TLMM.
> The driver requests resources operations over SCMI using power protocols.
>
> The SCMI power protocol enables or disables resources like clocks,
> interconnect paths, and TLMM (GPIOs) using runtime PM framework APIs,
> such as resume/suspend, to control power on/off.
>
> Power domain "core" controls the GDSC, resets, and TLMM (GPIOs)
> whereas power domain "transfer" controls clocks and interconnects.
>
> Patch 1 adds the binding for sa8255p. Similarly to what has been done
> for I2C [1], this is a separate binding.
>
> Patch 2 adds the driver change, which is based on a public vendor
> patch from qualcomm [2].
> I did the following changes on top of that:
> * Use devm_add_action_or_reset() for dev_pm_domain_detach_list() instead
>   of implementing a driver .remove()
> * Drop the .lanes struct member since it no longer exists.
> * Re-order some functions
>
> This has been tested on next-20260706 with a Ride4 SA8775P board that
> has SCMI firmware (which is compatible).
>
> [1] https://lore.kernel.org/all/20260617-enable-i2c-on-sa8255p-v7-1-ad736dbeab57@oss.qualcomm.com/
> [2] https://git.codelinaro.org/clo/le/meta-qti-auto-kernel/-/blob/LY.AU.0.1.0.r1-16800-gen4meta.0/recipes-kernel/linux/files/usb/0011-PENDING-phy-qcom-qmp-usb-Add-support-for-SA8255P.patch

I've talked to Vinod at plumbers and he told me your review is mandatory
for these patches to get picked up.

Could you have a look at let me know what you think please?

Thanks
Mattijs

>
> Signed-off-by: Mattijs Korpershoek <mkorpershoek at kernel.org>
> ---
> Changes in v6:
> - Applied R-b tags from Krzysztof and Neil
> - Link to v5: https://patch.msgid.link/20260903-phy-qcom-qmp-usb-8255-v5-0-e251e22b341e@kernel.org
>
> Changes in v5:
> - Move 'core' as first domain, before 'transfer' (Krzysztof)
> - Reworded binding commit message to be more precise about the various
>   domains ('core', 'transfer' and 'perf') (Krzysztof)
> - Dropped Krzysztof review due to the above binding changes
> - Set .num_vregs=0 since regulators are managed by firmware
> - Link to v4: https://patch.msgid.link/20260724-phy-qcom-qmp-usb-8255-v4-0-a90014fab476@kernel.org
>
> Changes in v4:
> * bindings: Use additionalProperties: instead of unevaluatedProperties:
>   (Krzysztof)
> - Link to v3: https://patch.msgid.link/20260722-phy-qcom-qmp-usb-8255-v3-0-e789070b48f7@kernel.org
>
> Changes in v3:
> * Binding changes:
>   * Use a separate binding file (Krzysztof)
>   * Remove 'usb_' prefix from power-domain-names (Krzysztof)
> * Driver changes:
>   * Remove 'usb_' prefix from power-domain-names
>   * Moved sa8255p_usb3_uniphy_cfg before sa8775p_usb3_uniphy_cfg
> * Link to v2: https://patch.msgid.link/20260709-phy-qcom-qmp-usb-8255-v2-0-3b6c26a45788@kernel.org
>
> Changes in v2:
> * Driver changes:
>   * Fix comment typo tranfer -> transfer
>   * Fix print statement to add a missing '(' in the string
>   * Use dev_err_probe() in qmp_usb_domain_attach() to reduce log noise
>   * Fix pm_runtime_put_sync() order in qmp_usb_d0_to_d3 (Sashiko)
>   * Fix runtime PM reference leak on usb_transfer (Sashiko)
>   * Fix runtime PM reference leak on error in qmp_usb_init (Sashiko)
>   * Reorder qmp_usb_d0_to_d3() to mirror init ordering in qmp_usb_exit()
>     (Sashiko)
>   * Reorder qmp_usb_d0_to_d3() to mirror resume ordering in
>     qmp_usb_runtime_suspend() (Sashiko)
>   * Fix error handling in qmp_usb_runtime_resume() (Sashiko)
> * Link to v1: https://patch.msgid.link/20260708-phy-qcom-qmp-usb-8255-v1-0-8d852a9535db@kernel.org
>
> ---
> Mattijs Korpershoek (1):
>       dt-bindings: phy: Add sa8255p USB PHY
>
> Sriram Dash (1):
>       phy: qcom: qmp-usb: Add support for SA8255P
>
>  .../phy/qcom,sa8255p-qmp-usb3-uni-phy.yaml         |  52 ++++++
>  drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 182 ++++++++++++++++++---
>  2 files changed, 212 insertions(+), 22 deletions(-)
> ---
> base-commit: 32b6ef9a5d0eca44f9cd91f52f4faa89f145a0de
> change-id: 20260708-phy-qcom-qmp-usb-8255-9986907cdbc9
>
> Best regards,
> -- 
> Mattijs Korpershoek <mkorpershoek at kernel.org>