[PATCH v2 12/13] phy: qcom: edp: Add Nord PHY configuration data tables

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] build: unused static symbols break compilation under Werror
--

commit bc3d5c7d159a12dc8bac2f06bcc9089584cfa877
Author: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>

phy: qcom: edp: Add Nord PHY configuration data tables

This commit adds Nord-specific AUX channel, VCO divider, LDO and TX
resistor calibration data. These tables are sourced from HPG Tables
2-1-a, 2-1-b and 2-1-d.

> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index 3e857d1056680..cb5f6e0ae607b 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -1741,6 +1741,39 @@ static int qcom_edp_com_configure_pll_nord(const struct qcom_edp *edp)
>  	return 0;
>  }
>  
> +static const u8 edp_phy_aux_cfg_nord[DP_AUX_CFG_SIZE] = {
> +	0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03, 0x02, 0x02, 0x04,
> +};
> +
> +static const u8 edp_phy_vco_div_cfg_nord[4] = {
> +	0x00, 0x00, 0x02, 0x01,
> +};

[Severity: Low]
Does this code introduce unused static variables?

These arrays, as well as tx_res_cfg_nord below, are defined as static but are
not referenced anywhere in this commit. Defining unreferenced static arrays
triggers a -Wunused-const-variable compiler warning.

If the kernel is built with CONFIG_WERROR=y, this warning is promoted to an
error and breaks the build. While a later patch in this series (commit
1393c79f29bd788a83ce23c45373ba39e69132d0) references these tables,
intermediate patches must compile cleanly to maintain git bisectability.

> +
> +static int qcom_edp_ldo_config_nord(const struct qcom_edp *edp)
> +{
> +	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
> +
> +	writel(0xd0, edp->tx0 + TXn_LDO_CONFIG);

[Severity: Low]
Does this code introduce an unused static function?

Similar to the static arrays above, qcom_edp_ldo_config_nord is defined as
static but never called in this commit. This triggers a -Wunused-function
warning, which will also break the build under CONFIG_WERROR=y.

[ ... ]

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261012-nord-drv-dt-v2-0-a2ab9af954d2@oss.qualcomm.com?part=12