[PATCH v2 09/13] phy: qcom: edp: Add Nord voltage-swing and pre-emphasis tables

[Nabige Aala]

From: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>

Nord requires different TX voltage-swing and pre-emphasis levels for
both eDP and DP modes.  Add four pairs of 4x4 tables covering
RBR/HBR and HBR2/HBR3 for each mode, sourced from HPG Tables 2-2,
2-4, 2-6-a and 2-6-b, and wrap them in qcom_edp_swing_pre_emph_cfg
descriptors.  The eDP RBR/HBR swing table reuses the existing
edp_swing_hbr_rbr directly; all other tables are new.

Assisted-by: LLM
Signed-off-by: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
Signed-off-by: Nabige Aala <nabige.aala at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 64 +++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index c5df1086607f..c63f721702b1 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -1538,6 +1538,70 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
+static const u8 nord_edp_pre_emp_hbr_rbr[4][4] = {
+	{ 0x05, 0x11, 0x17, 0x1d },
+	{ 0x05, 0x11, 0x18, 0xff },
+	{ 0x06, 0x11, 0xff, 0xff },
+	{ 0x00, 0xff, 0xff, 0xff },
+};
+
+static const u8 nord_edp_swing_hbr2_hbr3[4][4] = {
+	{ 0x0b, 0x11, 0x17, 0x1c },
+	{ 0x10, 0x19, 0x1f, 0xff },
+	{ 0x19, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff },
+};
+
+static const u8 nord_edp_pre_emp_hbr2_hbr3[4][4] = {
+	{ 0x0c, 0x15, 0x19, 0x1e },
+	{ 0x0b, 0x15, 0x19, 0xff },
+	{ 0x0e, 0x14, 0xff, 0xff },
+	{ 0x0d, 0xff, 0xff, 0xff },
+};
+
+static const struct qcom_edp_swing_pre_emph_cfg nord_edp_swing_pre_emph_cfg = {
+	.swing_hbr_rbr		= &edp_swing_hbr_rbr,
+	.swing_hbr3_hbr2	= &nord_edp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr	= &nord_edp_pre_emp_hbr_rbr,
+	.pre_emphasis_hbr3_hbr2	= &nord_edp_pre_emp_hbr2_hbr3,
+};
+
+static const u8 nord_dp_swing_hbr2_hbr3[4][4] = {
+	{ 0x02, 0x12, 0x16, 0x1a },
+	{ 0x09, 0x19, 0x1f, 0xff },
+	{ 0x10, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff },
+};
+
+static const u8 nord_dp_pre_emp_hbr2_hbr3[4][4] = {
+	{ 0x00, 0x0c, 0x15, 0x1b },
+	{ 0x02, 0x0e, 0x16, 0xff },
+	{ 0x02, 0x11, 0xff, 0xff },
+	{ 0x04, 0xff, 0xff, 0xff },
+};
+
+static const u8 nord_dp_swing_hbr_rbr[4][4] = {
+	{ 0x07, 0x0f, 0x16, 0x1f },
+	{ 0x11, 0x1e, 0x1f, 0xff },
+	{ 0x16, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff },
+};
+
+static const u8 nord_dp_pre_emp_hbr_rbr[4][4] = {
+	{ 0x00, 0x0e, 0x15, 0x1a },
+	{ 0x00, 0x0e, 0x15, 0xff },
+	{ 0x00, 0x0e, 0xff, 0xff },
+	{ 0x02, 0xff, 0xff, 0xff },
+};
+
+static const struct qcom_edp_swing_pre_emph_cfg nord_dp_swing_pre_emph_cfg = {
+	.swing_hbr_rbr		= &nord_dp_swing_hbr_rbr,
+	.swing_hbr3_hbr2	= &nord_dp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr	= &nord_dp_pre_emp_hbr_rbr,
+	.pre_emphasis_hbr3_hbr2	= &nord_dp_pre_emp_hbr2_hbr3,
+};
+
+
 static const struct of_device_id qcom_edp_phy_match_table[] = {
 	{ .compatible = "qcom,glymur-dp-phy", .data = &glymur_phy_cfg, },
 	{ .compatible = "qcom,sa8775p-edp-phy", .data = &sa8775p_dp_phy_cfg, },

-- 
2.34.1