[PATCH v19 06/12] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY

[bod at kernel.org]

On 2026-10-08 00:14 -0700, Hangxiang Ma wrote:
> Add support for the v2.4.0 two-phase CSIPHY found on Kaanapali, where
> the PHY is driven by the standalone phy-qcom-mipi-csi2 DPHY driver
> rather than by CAMSS. Add the mipi_csi2_dphy_3nm_kaanapali configuration,
> which reuses the x1e80100 lane sequence, clocks and supplies but selects
> the v2.4.0 common status offset, adds Kaanapali power domain and register
> the "qcom,kaanapali-csi2-phy" compatible.
> 
> Signed-off-by: Hangxiang Ma <hangxiang.ma at oss.qualcomm.com>
> ---
>  drivers/media/platform/qcom/camss/camss.c | 47 +++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index fca3de214a92..eeceb79c1e86 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -38,6 +38,51 @@
>  
>  static const struct parent_dev_ops vfe_parent_dev_ops;
>  
> +static const struct camss_subdev_resources csiphy_res_kaanapali[] = {
> +	/* CSIPHY0 */
> +	{
> +		.csiphy = {
> +			.id = 0,
> +			.formats = &csiphy_formats_sdm845
> +		},
> +	},
> +	/* CSIPHY1 */
> +	{
> +		.csiphy = {
> +			.id = 1,
> +			.formats = &csiphy_formats_sdm845
> +		},
> +	},
> +	/* CSIPHY2 */
> +	{
> +		.csiphy = {
> +			.id = 2,
> +			.formats = &csiphy_formats_sdm845
> +		},
> +	},
> +	/* CSIPHY3 */
> +	{
> +		.csiphy = {
> +			.id = 3,
> +			.formats = &csiphy_formats_sdm845
> +		},
> +	},
> +	/* CSIPHY4 */
> +	{
> +		.csiphy = {
> +			.id = 4,
> +			.formats = &csiphy_formats_sdm845
> +		},
> +	},
> +	/* CSIPHY5 */
> +	{
> +		.csiphy = {
> +			.id = 5,
> +			.formats = &csiphy_formats_sdm845
> +		},
> +	},
> +};

We should make this now very straight forward code into a macro driven enumeration.

Anyway.


Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
---
bod