[PATCH v19 12/12] arm64: dts: qcom: kaanapali: Add camera MCLK pinctrl

[Hangxiang Ma]

Add TLMM pinctrl states for the camera master clock GPIOs on Kaanapali so
camera sensor nodes can select the proper MCLK pin functions when enabled.

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy at linaro.org>
Signed-off-by: Hangxiang Ma <hangxiang.ma at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali.dtsi | 56 +++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index 710af0597aaa..f915a3d1530a 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -4570,6 +4570,62 @@ tlmm: pinctrl at f100000 {
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
+			cam_mclk0_default: cam-mclk0-default-state {
+				pins = "gpio89";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk1_default: cam-mclk1-default-state {
+				pins = "gpio90";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk2_default: cam-mclk2-default-state {
+				pins = "gpio91";
+				function = "cam_asc_mclk2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk3_default: cam-mclk3-default-state {
+				pins = "gpio92";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk4_default: cam-mclk4-default-state {
+				pins = "gpio93";
+				function = "cam_asc_mclk4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk5_default: cam-mclk5-default-state {
+				pins = "gpio94";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk6_default: cam-mclk6-default-state {
+				pins = "gpio95";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk7_default: cam-mclk7-default-state {
+				pins = "gpio96";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cci0_i2c0_default: cci0-i2c0-default-state {
 				scl-pins {
 					pins = "gpio110";

-- 
2.34.1