[PATCH 07/17] phy: qcom: edp: Add Nord-specific register offsets

Nabige Aala nabige.aala at oss.qualcomm.com
Tue Oct 6 23:12:37 PDT 2026


On 9/14/2026 5:28 AM, Dmitry Baryshkov wrote:
> On Fri, Sep 11, 2026 at 09:06:38PM +0530, Nabige Aala wrote:
>> From: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
>>
>> Nord relocates several DP PHY and QSERDES v8 COM registers relative
>> to existing SoCs.  Add Nord-specific defines for the relocated and
>> new-only registers in phy-qcom-qmp-qserdes-dp-com-v8.h and
>> phy-qcom-edp.c so Nord sequences can reference them by name.
> If the registers are reallocated it usually means that there are other
> registers being inserted (or deleted). Are those the only registers
> being changed?
Yes, only few register offset is changed that is taken care in this change.
>> Signed-off-by: Ritesh Kumar <ritesh.kumar at oss.qualcomm.com>
>> Signed-off-by: Nabige Aala <nabige.aala at oss.qualcomm.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-edp.c                   | 10 ++++++++++
>>   drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h |  3 +++
>>   2 files changed, 13 insertions(+)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
>> index a3c893f72908..bf8a17336c7e 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
>> @@ -41,9 +41,19 @@
>>   
>>   #define DP_PHY_VCO_DIV                          0x0074
>>   #define DP_PHY_TX0_TX1_LANE_CTL                 0x007c
>> +/* Nord uses a different register layout; non-Nord value is 0x00a0 */
>>   #define DP_PHY_TX2_TX3_LANE_CTL                 0x00a0
>> +#define DP_PHY_TX2_TX3_LANE_CTL_NORD            0x00c0
>>   
>> +/* Nord uses a different register layout; non-Nord value is 0x00e0 */
>>   #define DP_PHY_STATUS                           0x00e0
>> +#define DP_PHY_STATUS_NORD                      0x0110
>> +#define DP_PHY_LDO_CFG                          0x00f0
> Why does it not have a _NORD suffix?

Ack, I will add  _NORD suffix in the next revision.

Thanks

>
>> +
>> +/* Nord-specific TX lane registers */
>> +#define DP_PHY_TX_LN0_DRV_LVL_NORD             0x00e4
>> +#define DP_PHY_TX_LN1_DRV_LVL_NORD             0x00e8
>> +#define TXn_TX_BAND_NORD                        0x0024
>>   
>>   /* LANE_TXn registers */
>>   #define TXn_CLKBUF_ENABLE                       0x0000
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
>> index 93edabb830af..008b17222a8d 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h
>> @@ -48,5 +48,8 @@
>>   #define DP_QSERDES_V8_COM_CLK_FWD_CONFIG_1		0x2f4
>>   #define DP_QSERDES_V8_COM_CMN_STATUS			0x314
>>   #define DP_QSERDES_V8_COM_C_READY_STATUS		0x33c
>> +#define DP_QSERDES_V8_COM_SVS_MODE_CLK_SEL_NORD		0x17c
>> +#define DP_QSERDES_V8_COM_CMN_STATUS_NORD		0x1d0
>> +#define DP_QSERDES_V8_COM_C_READY_STATUS_NORD		0x1f8
>>   
>>   #endif
>>
>> -- 
>> 2.34.1
>>



More information about the linux-phy mailing list