[PATCH V5 0/4] arm64: dts: freescale: Add chargebyte Charge Control Y

[Stefan Wahren]

Hi Frank,

Am 23.09.26 um 11:19 schrieb Stefan Wahren:
> Hi Frank,
> hi Vinod,
>
> Am 21.09.26 um 16:46 schrieb Frank Li:
>> On Mon, Sep 21, 2026 at 03:09:23PM +0200, Stefan Wahren wrote:
>>> Hi Frank,
>>>
>>> Am 07.09.26 um 17:04 schrieb Stefan Wahren:
>>>> This series adds support for the chargebyte Charge Control Y, which is
>>>> an Electrical Vehicle Supply Equipment (EVSE) for MCS (Megawatt
>>>> Charging System) charging stations.
>>>>
>>>> sashiko reported in the first version of the series [1] that 
>>>> X_nRST_LAN
>>>> is available via GPIO line names, but there is no reset mechanismn 
>>>> in the
>>>> device tree. This finding is valid. Since the reset line feature isn't
>>>> implemented for LAN8651 driver yet, I like to proceed with the current
>>>> version. The LAN8651 handles reset via SPI commands and in rare cases
>>>> we still have the possibility to control the reset from userspace.
>>>> Btw the pin has a pull resistor in hardware, so it's not floating.
>>>>
>>>> sashiko complained in the fourth version of the series [2] about the
>>>> reset polarity of ethphy2 and the different drive strength across the
>>>> data lines. Both is intended.
>>>>
>>>> [1] - 
>>>> https://lore.kernel.org/linux-devicetree/20260818093147.E556C1F000E9@smtp.kernel.org/
>>>> [2] - 
>>>> https://lore.kernel.org/linux-devicetree/20260903082122.A777C1F000E9@smtp.kernel.org/
>>>>
>>>> Changes in V5:
>>>> - fix delete-node for pinctrl_leds (reported by sashiko)
>>>> - add Krzysztof's Reviewed-by
>>> I didn't received any feedback for V5 yet. Do you have any comments 
>>> or could
>>> it be merged?
>> Wait for vinod pick phy binding part.
> @Vinod are you fine with both PHY bindings?
>
> @Frank I noticed that this patch has a conflict with the Makefile in 
> linux-next. Should I rebase or do you resolve the conflict?
would it be better if I rebase now and send a V6, I concerned that this 
misses the cycle.

Best regards
>
> Best regards
>>
>> Frank
>>
>>> Best regards
>>>
>