[GIT PULL] clk: zte: zx297520v3 clock bindings and driver (v2)

[Brian Masney]

Hi Stefan,

On Thu, Oct 01, 2026 at 08:39:27PM +0300, Stefan Dösinger wrote:
> Hi,
> 
> This pull request contains the device tree bindings and clock driver for
> ZTE zx297520v3 boards. It contains the next step in adding support for
> zx297520v3 boards: Documenting clock and reset manager hardware and
> adding drivers for its PLLs and clock tree. This is v2 of the pull
> request, based on v7.3-rc1 rather than clk-next.
> 
> The patches have been reviewed and carry appropriate R-B tags by
> Krzysztof Kozlowski (bindings) and Brian Masney (clk driver).
> 
> The PR does not contain the MFD, reset and device tree patches. They
> will be submitted to the MFD, reset and soc trees respectively. The
> clock driver compiles without them, but won't be instantiated without
> the MFD parent.
> 
> The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:
> 
>   Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)
> 
> are available in the Git repository at:
> 
>   https://gitlab.com/stefandoesinger/zx297520-kernel.git tags/v2-zx29-clk-for-7.4
> 
> for you to fetch changes up to 75e4151c9e157d84c8c6c365893ecf33d221bca5:
> 
>   clk: zte: Introduce a driver for zx297520v3 LSP clocks (2026-10-01 20:20:43 +0300)
> 
> ----------------------------------------------------------------
> clk: zte: Add clock drivers for zx297520v3 SoC
> 
> This tag contains the device tree bindings and clock driver for ZTE
> zx297520v3 boards. It contains the next step in adding support for
> zx297520v3 boards: Documenting clock and reset manager hardware and
> adding drivers for its PLLs and clock tree.
> 
> The PR does not contain the MFD, reset and device tree patches. They
> will be submitted to the MFD, reset and soc trees respectively. The
> clock driver compiles without them, but won't be instantiated without
> the MFD parent.
> 
> ----------------------------------------------------------------
> Stefan Dösinger (9):
>       dt-bindings: clk: zte: Add zx297520v3 top clock and reset controller
>       dt-bindings: clk: zte: Add zx297520v3 matrix clock and reset controller
>       dt-bindings: clk: zte: Add zx297520v3 LSP clock and reset controller
>       clk: zte: Add Clock registration infrastructure
>       clk: zte: Add regmap-based clocks
>       clk: zte: Add zx PLL support infrastructure
>       clk: zte: Introduce a driver for zx297520v3 top clocks
>       clk: zte: Introduce a driver for zx297520v3 matrix clocks
>       clk: zte: Introduce a driver for zx297520v3 LSP clocks

The commits in the pull have the changelog in the commit message. For
example:

https://gitlab.com/stefandoesinger/zx297520-kernel/-/commit/75e4151c9e157d84c8c6c365893ecf33d221bca5

I went to the last series and cherry picked the relevant commits.

Brian