[PATCH v6 2/3] arm64: dts: nuvoton: ma35d1: add USB controllers and dual-port PHY node

[Jacky Huang]

> Add the USB subsystem nodes for the MA35D1 SoC and boards:
>
>    - usb_phy: standalone PHY node with #phy-cells = <1>, covering both
>      the OTG port (PHY0, index 0) and the host-only port (PHY1, index 1).
>      Uses nuvoton,sys phandle and HUSBH0_GATE clock per the binding.
>
>    - usb (DWC2 gadget, USB0): phys = <&usb_phy 0>, dr_mode = peripheral.
>    - ehci0/ohci0 (USB0 host): phys = <&usb_phy 0>, companion pairing.
>    - ehci1/ohci1 (USB1 host): phys = <&usb_phy 1>.
>
> Board files (ma35d1-som-256m.dts, ma35d1-iot-512m.dts) add pinctrl for
> VBUSVLD, PWREN and OVC signals and enable all USB nodes.
>
> Signed-off-by: Joey Lu <a0987203069 at gmail.com>
> ---
>   .../boot/dts/nuvoton/ma35d1-iot-512m.dts      | 36 ++++++++++
>   .../boot/dts/nuvoton/ma35d1-som-256m.dts      | 36 ++++++++++
>   arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       | 65 +++++++++++++++++++
>   3 files changed, 137 insertions(+)
[...]


Reviewed-by: Jacky Huang <ychuang3 at nuvoton.com>

Best regards,
Jacky Huang