[PATCH] phy: broadcom: use devm_clk_get() in brcm_usb_phy_dvr_init()

Wentao Liang vulab at iscas.ac.cn
Tue Nov 3 02:42:40 PST 2026


brcm_usb_phy_dvr_init() obtains the USB 2.0, USB 3.0 and suspend
clocks with of_clk_get_by_name() and clk_get().  Both take a reference
on the clock that the driver never releases: the error paths after the
lookups return without clk_put(), and brcm_usb_phy_remove() only
unregisters the sysfs group and the PM notifier.  clk_prepare_enable()
and clk_disable_unprepare() only change the prepare/enable counts and
do not drop the reference.

Use devm_clk_get() so that the references are dropped automatically on
probe failure and driver detach, and drop the now unused device node
argument.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Cc: stable at vger.kernel.org
Assisted-by: DeepSeek-V4.1-Flash and OpenAI Codex
Signed-off-by: Wentao Liang <vulab at iscas.ac.cn>
---
 drivers/phy/broadcom/phy-brcm-usb.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index e606db489698..c0cb701e419a 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -401,14 +401,13 @@ static int brcm_usb_get_regs(struct platform_device *pdev,
 }
 
 static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
-				 struct brcm_usb_phy_data *priv,
-				 struct device_node *dn)
+				 struct brcm_usb_phy_data *priv)
 {
 	struct device *dev = &pdev->dev;
 	struct phy *gphy = NULL;
 	int err;
 
-	priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
+	priv->usb_20_clk = devm_clk_get(dev, "sw_usb");
 	if (IS_ERR(priv->usb_20_clk)) {
 		if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
@@ -440,7 +439,7 @@ static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
 		priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0;
 		phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]);
 
-		priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
+		priv->usb_30_clk = devm_clk_get(dev, "sw_usb3");
 		if (IS_ERR(priv->usb_30_clk)) {
 			if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER)
 				return -EPROBE_DEFER;
@@ -453,7 +452,7 @@ static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
 			return err;
 	}
 
-	priv->suspend_clk = clk_get(dev, "usb0_freerun");
+	priv->suspend_clk = devm_clk_get(dev, "usb0_freerun");
 	if (IS_ERR(priv->suspend_clk)) {
 		if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
@@ -542,7 +541,7 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 			return -EINVAL;
 	}
 
-	err = brcm_usb_phy_dvr_init(pdev, priv, dn);
+	err = brcm_usb_phy_dvr_init(pdev, priv);
 	if (err)
 		return err;
 
-- 
2.34.1




More information about the linux-phy mailing list