[PATCH] dt-bindings: Use hex unit address patterns

[Lee Jones]

On Mon, 02 Nov 2026, Rob Herring (Arm) wrote:

> Unit-addresses by default (and most commonly) are hexadecimal. There's a
> number of cases using decimal patterns. Fix all of them, limiting the
> pattern to match the 'reg' limits if there are any.
> 
> Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
> ---
>  .../bindings/display/xylon,logicvc-display.yaml      |  2 +-
>  .../devicetree/bindings/dpll/dpll-device.yaml        |  2 +-
>  .../bindings/embedded-controller/google,cros-ec.yaml |  4 ++--
>  .../intel,ixp4xx-network-processing-engine.yaml      |  2 +-
>  Documentation/devicetree/bindings/gpio/gpio-mxs.yaml |  4 ++--
>  .../devicetree/bindings/hwmon/maxim,max31790.yaml    |  2 +-
>  .../devicetree/bindings/iio/adc/st,stm32-adc.yaml    |  2 +-
>  .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml         |  6 +++---
>  .../bindings/input/touchscreen/cypress,tt21000.yaml  |  2 +-
>  .../memory-controllers/ddr/jedec,sdram-channel.yaml  | 12 ++++++------
>  .../bindings/memory-controllers/ingenic,nemc.yaml    |  2 +-
>  .../memory-controllers/nvidia,tegra20-emc.yaml       |  4 ++--

>  .../devicetree/bindings/mfd/st,stm32-lptimer.yaml    |  2 +-
>  .../devicetree/bindings/mfd/st,stm32-timers.yaml     |  2 +-

Acked-by: Lee Jones <lee at kernel.org>

>  .../devicetree/bindings/misc/qcom,fastrpc.yaml       |  2 +-
>  .../bindings/mmc/mmc-controller-common.yaml          |  2 +-
>  .../bindings/net/cortina,gemini-ethernet.yaml        |  2 +-
>  .../bindings/phy/brcm,cygnus-pcie-phy.yaml           |  2 +-
>  .../devicetree/bindings/phy/brcm,sata-phy.yaml       |  2 +-
>  .../bindings/phy/socionext,uniphier-usb2-phy.yaml    |  2 +-
>  .../devicetree/bindings/sound/qcom,q6asm-dais.yaml   |  2 +-
>  .../bindings/sound/qcom,q6dsp-lpass-ports.yaml       |  2 +-
>  .../devicetree/bindings/thermal/sprd-thermal.yaml    |  2 +-
>  23 files changed, 33 insertions(+), 33 deletions(-)

-- 
Lee Jones