[PATCH 3/3] phy: qcom: qmp-combo: Use V6 offsets for PCS-AON clamps

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

These V6 combo PHYs were configured with the V3 resource-offset table,
which omits their PCS-AON window. Autonomous-mode suspend therefore
cannot reach the HPG-required clamp register.

Select the existing V6 offsets for SAR2130P, SM8475, SM8550, and
SM8650.

Signed-off-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 84b9d6f3969c..f9ab503c81ac 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2793,7 +2793,7 @@ static const struct qmp_combo_offsets qmp_combo_usb43dp_offsets_v8 = {
 };
 
 static const struct qmp_phy_cfg sar2130p_usb3dpphy_cfg = {
-	.offsets		= &qmp_combo_offsets_v3,
+	.offsets		= &qmp_combo_offsets_v6,
 
 	.serdes_tbl		= sar2130p_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sar2130p_usb3_serdes_tbl),
@@ -3224,7 +3224,7 @@ static const struct qmp_phy_cfg sm8350_usb3dpphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sm8475_usb3dpphy_cfg = {
-	.offsets		= &qmp_combo_offsets_v3,
+	.offsets		= &qmp_combo_offsets_v6,
 
 	.serdes_tbl		= sar2130p_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sar2130p_usb3_serdes_tbl),
@@ -3269,7 +3269,7 @@ static const struct qmp_phy_cfg sm8475_usb3dpphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
-	.offsets		= &qmp_combo_offsets_v3,
+	.offsets		= &qmp_combo_offsets_v6,
 
 	.serdes_tbl		= sm8550_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sm8550_usb3_serdes_tbl),
@@ -3314,7 +3314,7 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sm8650_usb3dpphy_cfg = {
-	.offsets		= &qmp_combo_offsets_v3,
+	.offsets		= &qmp_combo_offsets_v6,
 
 	.serdes_tbl		= sm8550_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sm8550_usb3_serdes_tbl),

-- 
2.56.0