[PATCH 21/27] phy: rockchip-inno-usb2: Add RK3572 support

[Cunhao Lu]

Hi,

>> + refclk = devm_clk_get(rphy->dev, "phyclk");
>> + if (IS_ERR(refclk))
>> + return PTR_ERR(refclk);
>
> Please insert a newline between each operation to improve readability.
>
>> + rate = clk_get_rate(refclk);
>> + if (rate != 24000000 && rate != 26000000)
>> + return -EINVAL;

I will add a blank line here and between the other operations to improve
readability.

>> + /* Set the normal line-state filter interval. */
>> + ret = regmap_write(rphy->grf, reg + 0x0020, 0x30100);
>> + if (ret)
>> + return ret;
>
> Here.
>
>> + /* Increase HS voltage by 5.89% and double pre-emphasis current. */
>> + ret = regmap_write(rphy->grf, reg + 0x000c, GENMASK(27, 24) | 0x0900);
>> + if (ret)
>> + return ret;
>
> And here.

I will add blank lines at these places too.

I am working on splitting the patches by subsystem, and I will
resubmit this patch as part of v2 after addressing these comments.

Thank you for your review!

Best regards,
Cunhao Lu