[PATCH] phy: ingenic: Don't disable the supply in exit

[Manivannan Sadhasivam]

On 2026-10-24 07:17 +0200, Olivier Louvignes wrote:
> The supply is enabled in power_on() and disabled in power_off(); exit()
> disabling it again unbalances it. dwc2 powers its PHY off before exiting
> it, which warns at every probe on an Ingenic X1600:
> 
>   WARNING: ... _regulator_disable
>   ...
>   ingenic_usb_phy_exit
>   phy_exit
>   dwc2_lowlevel_hw_disable
>   dwc2_driver_probe
> 
> Fixes: 31de313dfdcf ("PHY: Ingenic: Add USB PHY driver using generic PHY framework.")
> Signed-off-by: Olivier Louvignes <olivier at mgcrea.io>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at oss.qualcomm.com>

- Mani