[PATCH v2] phy: renesas: phy-rzg3e-usb3: Use SYSTEM_SLEEP_PM_OPS instead of NOIRQ

[Biju Das]

Hi Ovidiu,

Thanks for the patch.

> -----Original Message-----
> From: Ovidiu Panait <ovidiu.panait.rb at renesas.com>
> Sent: 27 May 2026 09:21
> Subject: [PATCH v2] phy: renesas: phy-rzg3e-usb3: Use SYSTEM_SLEEP_PM_OPS instead of NOIRQ
> 
> On the Renesas RZ/V2H platform, if the xhci driver is unbound and the system is suspended afterwards,
> a PM underflow error will occur:
> 
>  # echo 15850000.usb > /sys/bus/platform/drivers/xhci-renesas-hcd/unbind
>  # systemctl suspend
>  15870000.usb-phy: PM: dpm_run_callback(): genpd_resume_noirq returns -13
>  15870000.usb-phy: PM: failed to resume noirq: error -13
>  15870000.usb-phy: Runtime PM usage count underflow!
> 
> When the xhci driver is unbound, the runtime PM usage count of the PHY drops to 0. Since the
> suspend/resume callbacks are in the noirq phase, the pm_runtime_resume_and_get() on resume errors out
> with -EACCES and the usage count stays at 0. The subsequent put in device_complete() then underflows
> the counter.
> 
> To fix this, move the suspend/resume callbacks out of the noirq phase by switching from
> NOIRQ_SYSTEM_SLEEP_PM_OPS to SYSTEM_SLEEP_PM_OPS.
> 
> Fixes: ee5f1a3f90a4 ("phy: renesas: Add Renesas RZ/G3E USB3.0 PHY driver")
> Signed-off-by: Ovidiu Panait <ovidiu.panait.rb at renesas.com>

Reviewed-by: Biju Das <biju.das.jz at bp.renesas.com>

Cheers,
Biju

> ---
> v2:
> - Dropped the runtime PM rework part from the previous version, as it
>   was not needed to fix the original issue.
> 
> v1: https://lore.kernel.org/all/20260427194741.161533-1-ovidiu.panait.rb@renesas.com/
> 
>  drivers/phy/renesas/phy-rzg3e-usb3.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/phy/renesas/phy-rzg3e-usb3.c b/drivers/phy/renesas/phy-rzg3e-usb3.c
> index 060309547ea5..4d2b0f5f5b09 100644
> --- a/drivers/phy/renesas/phy-rzg3e-usb3.c
> +++ b/drivers/phy/renesas/phy-rzg3e-usb3.c
> @@ -233,7 +233,7 @@ static int rzg3e_phy_usb3_resume(struct device *dev)  }
> 
>  static const struct dev_pm_ops rzg3e_phy_usb3_pm = {
> -	NOIRQ_SYSTEM_SLEEP_PM_OPS(rzg3e_phy_usb3_suspend, rzg3e_phy_usb3_resume)
> +	SYSTEM_SLEEP_PM_OPS(rzg3e_phy_usb3_suspend, rzg3e_phy_usb3_resume)
>  };
> 
>  static const struct of_device_id rzg3e_phy_usb3_match_table[] = {
> --
> 2.34.1