[PATCH v3 2/4] dt-bindings: phy: qcom,qcs615-qmp-usb3-dp-phy: Add support for Shikra

[Krzysztof Kozlowski]

On Wed, May 27, 2026 at 12:13:59AM +0530, Pratham Pratap wrote:
> From: Krishna Kurapati <krishna.kurapati at oss.qualcomm.com>
> 
> Declare the USB QMP Phy present on Shikra SoC. On this SoC, although
> there are DP registers, the required internal pins have been removed
> and hence DP wouldn't be operational.
> 
> Shikra needs 3 resets (dp/ phy/ phy_phy) to be asserted and de-asserted
> as per hardware recommendation. Extend the bindings to accommodate the
> additional reset.
> 
> Use QCS615 as a fallback since the software interface is compatible with
> Shikra.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati at oss.qualcomm.com>
> Signed-off-by: Pratham Pratap <pratham.pratap at oss.qualcomm.com>
> ---
>  .../bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml    | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml
> index efb465c71c1b..65ae4c6e09db 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml
> @@ -16,8 +16,12 @@ description:
>  
>  properties:
>    compatible:
> -    enum:
> -      - qcom,qcs615-qmp-usb3-dp-phy
> +    oneOf:
> +      - items:
> +          - enum:
> +              - qcom,shikra-qmp-usb3-dp-phy
> +          - const: qcom,qcs615-qmp-usb3-dp-phy
> +      - const: qcom,qcs615-qmp-usb3-dp-phy
>  
>    reg:
>      maxItems: 1
> @@ -33,12 +37,15 @@ properties:
>        - const: pipe
>  
>    resets:
> -    maxItems: 2
> +    minItems: 2
> +    maxItems: 3

So QCS615 has three resets now? This needs to be explained in the commit
msg. Or fixed with constraints, see writing bindings.

>  
>    reset-names:
> +    minItems: 2
>      items:
>        - const: phy_phy
>        - const: dp_phy
> +      - const: phy

Not phy_phy_phy? Joking aside, you already have a phy - "phy_phy" - so
this is not correct name. I don't know what is the correct name, though.
Please consult device manual.


>  
>    vdda-phy-supply: true
>  
> -- 
> 2.34.1
>