[PATCH v3 4/4] phy: qcom: qmp-usbc: Add support for "phy" reset used on Shikra

[Xiangxu Yin]

On 5/27/2026 2:44 AM, Pratham Pratap wrote:
> From: Krishna Kurapati <krishna.kurapati at oss.qualcomm.com>
>
> Shikra uses three resets (dp/ phy/ phy_phy). Add the extra "phy" reset
> needed for operation of QMP Phy on Shikra.
>
> Signed-off-by: Krishna Kurapati <krishna.kurapati at oss.qualcomm.com>
> Signed-off-by: Pratham Pratap <pratham.pratap at oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> index c342479a3798..067e7f6e5642 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> @@ -513,7 +513,7 @@ static const char * const usb3phy_reset_l[] = {
>  };
>  
>  static const char * const usb3dpphy_reset_l[] = {
> -	"phy_phy", "dp_phy",
> +	"phy_phy", "dp_phy", "phy",
>  };
>  


usb3dpphy_reset_l is shared with qcs615_usb3dp_phy_cfg, but I didn't find any optional-reset handling in qmp_usbc_reset_init().
talos.dtsi only defines two resets for qcom,qcs615-qmp-usb3-dp-phy, so adding "phy" here unconditionally will break probe on QCS615. 
Please create a separate reset list for Shikra instead.


>  static const struct regulator_bulk_data qmp_phy_msm8998_vreg_l[] = {