[PATCH V2 3/3] phy: qcom-qmp-ufs: Add UFS PHY support on Hawi

[Dmitry Baryshkov]

On Fri, May 22, 2026 at 10:57:16PM +0530, palash.kambar at oss.qualcomm.com wrote:
> From: Palash Kambar <palash.kambar at oss.qualcomm.com>
> 
> Add the init sequence tables and config for the UFS QMP phy found in
> the Hawi SoC.
> 
> Signed-off-by: Palash Kambar <palash.kambar at oss.qualcomm.com>
> ---
>  .../phy/qualcomm/phy-qcom-qmp-pcs-ufs-v7.h    |  24 +++
>  .../phy-qcom-qmp-qserdes-txrx-ufs-v8.h        |  37 +++++
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c       | 140 ++++++++++++++++++
>  3 files changed, 201 insertions(+)
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v7.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v8.h
> 
> @@ -1306,6 +1315,12 @@ static const struct regulator_bulk_data sm8750_ufsphy_vreg_l[] = {
>  	{ .supply = "vdda-pll", .init_load_uA = 18300 },
>  };
>  
> +static const struct regulator_bulk_data hawi_ufsphy_vreg_l[] = {
> +	{ .supply = "vdda-phy", .init_load_uA = 324000 },
> +	{ .supply = "vdda-pll", .init_load_uA = 27000 },
> +

Stray empty line

> +};
> +
>  static const struct qmp_ufs_offsets qmp_ufs_offsets = {
>  	.serdes		= 0,
>  	.pcs		= 0xc00,

-- 
With best wishes
Dmitry