[PATCH 2/4] dt-bindings: PCI: qcom: Document the Eliza PCIe Controller

[Krzysztof Kozlowski]

On Thu, May 21, 2026 at 07:35:30PM +0530, Krishna Chaitanya Chundru wrote:
> +description:
> +  Qualcomm ELIZA SoC (and compatible) PCIe root complex controller is based on
> +  the Synopsis DesignWare PCIe IP.
> +
> +properties:
> +  compatible:
> +    const: qcom,pcie-eliza

All new pcie compatibles moved to correct format.

> +
> +  reg:
> +    minItems: 5
> +    maxItems: 6
> +
> +  reg-names:
> +    minItems: 5
> +    items:
> +      - const: parf # Qualcomm specific registers
> +      - const: dbi # DesignWare PCIe registers
> +      - const: elbi # External local bus interface registers
> +      - const: atu # ATU address space
> +      - const: config # PCIe configuration space
> +      - const: mhi # MHI registers
> +
> +  clocks:
> +    maxItems: 7
> +
> +  clock-names:
> +    items:
> +      - const: aux # Auxiliary clock
> +      - const: cfg # Configuration clock
> +      - const: bus_master # Master AXI clock
> +      - const: bus_slave # Slave AXI clock
> +      - const: slave_q2a # Slave Q2A clock
> +      - const: ddrss_sf_tbu # PCIe SF TBU clock
> +      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
> +
> +  interrupts:
> +    minItems: 8

This should not be flexible. Neither 'reg'.

> +    maxItems: 9
> +
> +  interrupt-names:
> +    minItems: 8
> +    items:
> +      - const: msi0
> +      - const: msi1
> +      - const: msi2
> +      - const: msi3
> +      - const: msi4
> +      - const: msi5
> +      - const: msi6
> +      - const: msi7
> +      - const: global
> +
> +  resets:
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: pci # PCIe core reset
> +      - const: link_down # PCIe link down reset
> +
> +required:
> +  - power-domains
> +  - resets
> +  - reset-names
> +
> +allOf:
> +  - $ref: qcom,pcie-common.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,eliza-gcc.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interconnect/qcom,eliza-rpmh.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie at 1c00000 {
> +            compatible = "qcom,pcie-eliza";
> +            reg = <0 0x01c00000 0 0x3000>,
> +                  <0 0x40000000 0 0xf1d>,
> +                  <0 0x40000f20 0 0xa8>,
> +                  <0 0x40001000 0 0x1000>,
> +                  <0 0x40100000 0 0x100000>;
> +            reg-names = "parf", "dbi", "elbi", "atu", "config";
> +            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
> +                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x3d00000>;
> +
> +            bus-range = <0x00 0xff>;
> +            device_type = "pci";
> +            linux,pci-domain = <0>;
> +            num-lanes = <1>;
> +
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +
> +            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> +                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> +                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> +                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
> +                     <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
> +                     <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
> +            clock-names = "aux",
> +                          "cfg",
> +                          "bus_master",
> +                          "bus_slave",
> +                          "slave_q2a",
> +                          "ddrss_sf_tbu",
> +                          "cnoc_sf_axi";
> +
> +            dma-coherent;
> +
> +            interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "msi0", "msi1", "msi2", "msi3",
> +                              "msi4", "msi5", "msi6", "msi7", "global";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0x7>;
> +            interrupt-map = <0 0 0 1 &intc 0 0 0 564 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +                            <0 0 0 2 &intc 0 0 0 565 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +                            <0 0 0 3 &intc 0 0 0 566 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +                            <0 0 0 4 &intc 0 0 0 567 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +
> +            interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
> +                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
> +            interconnect-names = "pcie-mem", "cpu-pcie";
> +
> +            iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
> +                        <0x100 &apps_smmu 0x1481 0x1>;
> +
> +            pinctrl-0 = <&pcie0_default_state>;
> +            pinctrl-names = "default";
> +
> +            power-domains = <&gcc GCC_PCIE_0_GDSC>;
> +
> +            resets = <&gcc GCC_PCIE_0_BCR>,
> +                     <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
> +            reset-names = "pci",
> +                          "link_down";
> +

Drop stray blank line.

> +        };
> +    };
> 
> -- 
> 2.34.1
>