[PATCH v6 2/6] phy: realtek: usb2: introduce read and write functions to driver data

[Rustam Adilov]

RTL9607C is a big endian SoC with little endian USB host controller but
vstatus register is from big endian memory region and thus existing
writel doesn't work. It needs either __raw_writel or iowrite32be
instead.

To handle this situation, introduce read and write function to the
driver data and create a default variation for the current RTD SoCs.

Assign the existing phy configuration for RTD SoCs to the default
read and write function.

Co-developed-by: Michael Zavertkin <misha.zavertkin at mail.ru>
Signed-off-by: Michael Zavertkin <misha.zavertkin at mail.ru>
Signed-off-by: Rustam Adilov <adilov at disroot.org>
---
 drivers/phy/realtek/phy-rtk-usb2.c | 40 ++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c
index bd9ee895b9f9..a9e29d2f7e6f 100644
--- a/drivers/phy/realtek/phy-rtk-usb2.c
+++ b/drivers/phy/realtek/phy-rtk-usb2.c
@@ -67,6 +67,9 @@ struct phy_reg {
 	int vstatus_offset;
 	u32 vstatus_busy;
 	u32 new_reg_req;
+
+	u32 (*read)(void __iomem *reg);
+	void (*write)(u32 val, void __iomem *reg);
 };
 
 struct phy_data {
@@ -102,6 +105,9 @@ struct phy_cfg {
 	int vstatus_offset;
 	u32 vstatus_busy;
 	u32 new_reg_req;
+
+	u32 (*read)(void __iomem *reg);
+	void (*write)(u32 val, void __iomem *reg);
 };
 
 struct phy_parameter {
@@ -128,6 +134,16 @@ struct rtk_phy {
 	struct dentry *debug_dir;
 };
 
+static u32 rtk_usb2phy_read(void __iomem *reg)
+{
+	return readl(reg);
+}
+
+static void rtk_usb2phy_write(u32 val, void __iomem *reg)
+{
+	writel(val, reg);
+}
+
 /* mapping 0xE0 to 0 ... 0xE7 to 7, 0xF0 to 8 ,,, 0xF7 to 15 */
 static inline int page_addr_to_array_index(u8 addr)
 {
@@ -200,8 +216,8 @@ static int rtk_phy_write(struct phy_reg *phy_reg, char addr, char data)
 	int ret = 0;
 
 	/* write data to VStatusOut2 (data output to phy) */
-	writel((u32)data << shift_bits,
-	       reg_wrap_vstatus + phy_reg->vstatus_offset);
+	phy_reg->write((u32)data << shift_bits,
+		       reg_wrap_vstatus + phy_reg->vstatus_offset);
 
 	ret = utmi_wait_register(reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
 	if (ret)
@@ -985,6 +1001,8 @@ static int parse_phy_data(struct rtk_phy *rtk_phy)
 		phy_parameter->phy_reg.vstatus_offset = phy_cfg->vstatus_offset;
 		phy_parameter->phy_reg.vstatus_busy = phy_cfg->vstatus_busy;
 		phy_parameter->phy_reg.new_reg_req = phy_cfg->new_reg_req;
+		phy_parameter->phy_reg.read = phy_cfg->read;
+		phy_parameter->phy_reg.write = phy_cfg->write;
 
 		if (of_property_read_bool(np, "realtek,inverse-hstx-sync-clock"))
 			phy_parameter->inverse_hstx_sync_clock = true;
@@ -1099,6 +1117,8 @@ static const struct phy_cfg rtd1295_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1395_phy_cfg = {
@@ -1126,6 +1146,8 @@ static const struct phy_cfg rtd1395_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1395_phy_cfg_2port = {
@@ -1153,6 +1175,8 @@ static const struct phy_cfg rtd1395_phy_cfg_2port = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1619_phy_cfg = {
@@ -1178,6 +1202,8 @@ static const struct phy_cfg rtd1619_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1319_phy_cfg = {
@@ -1207,6 +1233,8 @@ static const struct phy_cfg rtd1319_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1312c_phy_cfg = {
@@ -1235,6 +1263,8 @@ static const struct phy_cfg rtd1312c_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1619b_phy_cfg = {
@@ -1263,6 +1293,8 @@ static const struct phy_cfg rtd1619b_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1319d_phy_cfg = {
@@ -1291,6 +1323,8 @@ static const struct phy_cfg rtd1319d_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct phy_cfg rtd1315e_phy_cfg = {
@@ -1320,6 +1354,8 @@ static const struct phy_cfg rtd1315e_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = rtk_usb2phy_read,
+	.write = rtk_usb2phy_write,
 };
 
 static const struct of_device_id usbphy_rtk_dt_match[] = {
-- 
2.54.0