[PATCH 5/5] arm64: dts: qcom: hamoa: Extend QMPPHY description for USB4

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

The USB4 part of the QMPPHY requires that one more GCC clock (P2RR2P -
PHY-to-Router, Router-to-PHY) is enabled for the PHY to initialize
successfully. Describe that.

Signed-off-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa.dtsi | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 4ba751a65142..63430f49ba2a 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -2883,11 +2883,13 @@ usb_1_ss0_qmpphy: phy at fd5000 {
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB4_0_PHY_P2RR2P_PIPE_CLK>;
 			clock-names = "aux",
 				      "ref",
 				      "com_aux",
-				      "usb3_pipe";
+				      "usb3_pipe",
+				      "p2rr2p_pipe";
 
 			power-domains = <&gcc GCC_USB_0_PHY_GDSC>;
 
@@ -2954,11 +2956,13 @@ usb_1_ss1_qmpphy: phy at fda000 {
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&tcsr TCSR_USB4_1_CLKREF_EN>,
 				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB4_1_PHY_P2RR2P_PIPE_CLK>;
 			clock-names = "aux",
 				      "ref",
 				      "com_aux",
-				      "usb3_pipe";
+				      "usb3_pipe",
+				      "p2rr2p_pipe";
 
 			power-domains = <&gcc GCC_USB_1_PHY_GDSC>;
 
@@ -3025,11 +3029,13 @@ usb_1_ss2_qmpphy: phy at fdf000 {
 			clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>,
 				 <&tcsr TCSR_USB4_2_CLKREF_EN>,
 				 <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>;
+				 <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB4_2_PHY_P2RR2P_PIPE_CLK>;
 			clock-names = "aux",
 				      "ref",
 				      "com_aux",
-				      "usb3_pipe";
+				      "usb3_pipe",
+				      "p2rr2p_pipe";
 
 			power-domains = <&gcc GCC_USB_2_PHY_GDSC>;
 

-- 
2.54.0